MiraFlor Metallux System

Product families

Other characteristics

Brand

MiraFlor

Features

Abrasion Resistant, Chemical Resistant, Clarity, Consistent Performance, Fast Cure, Good Color Stability, Good Surface Finish, Good UV Stability, High Solids Content, Light Reflecting, Long Shelf Life, Low Odor

Product Type

Coating

Compatible Substrates & Surfaces

Concrete

Usage

• Retail malls and stores
• Commercial offices and reception areas
• Restaurants, lounges and night clubs
• Entertainment and dining facilities
• Automotive and show room floors
• Fitness centers and locker rooms
• Cafeteria's and food service facilities
• Residential basements and garage floors.

Markets

• Building & Construction
• Paints & Coatings

Mix Ratio

MiraFlor CQ Clear Epoxy Component 'A':Component 'B' = 2:1 by volume. MiraFlor Metallux Pigments One (1) 8 oz. jar per mixed gallon - always add to Component A (Due to settlement and compaction jars may appear short-filled)

Advantages

Limitless distinctive designs and color variations.; Superior chemical and abrasion resistance.; Wide range of metallic colors and resin choices.; Blend two or more pigments to create hybrid colors; Lower maintenance and life cycle costs vs. other flooring types.; LEED-compliant, low odor and fast cure time.; Meets USDA, FDA, OSHA standards.; Superior resin clarity, color retention and UV stability.

Show in full

Limitations

Installed product forms a vapor barrier after cure.; Not intended for use on exterior concrete slabs-on-grade.; Minimum ambient/substrate temperature of 50°F (10°C).; Concrete must be minimum age of 21-28 days, depending on mix design, curing and drying conditions.; Maximum allowable moisture vapor transmission (MVT) of 3.0 lbs./1000 sf./per 24 hr. period per ASTM F1869 (CaCl Testing).; Maximum allowable moisture vapor transmission (MVT) of 75% RH as per ASTM F2170 (RH-relative humidity testing).; Use MiraPrime MVERS epoxy moisture mitigation primer over concrete substrates that have MVT emissions that exceed these limits.

Show in full

Technology

Ready-to-Use Products

For Best Results

Always install a minimum 4' by 4' test area site mock up for approval of acceptable color, texture, finish, adhesion, and any other critical requirement acceptable to the owner prior to proceeding with the installation.; Verify and download current versions of product technical data sheets (PTDS), material safety data sheets (MSDS), and installation guides (IG).; Protect materials at all times from excessive heat and cold, and pre-condition to room temperature as necessary.; Regularly check wet film thickness with mil gage and monitor consumption to ensure correct application rates are obtained.; The proper application of this product is the sole responsibility of the end user. Job site visits by Miracote representatives are only for the purpose of making recommendations, and do not assume any liability for supervision or quality control.; Measure surface and ambient temperatures to ensure the material is only applied when temperatures are 50°F (10°C), and rising during placement and cure time.; Always have a porcupine roller on hand in the event that bubbling or outgassing occurs.

Show in full