VAPORTIGHT COAT® SG2
- Chemical Family
- Epoxy & Epoxy Derivatives
VAPORTIGHT COAT® SG2 is a unique 2-component, alkali resistant, moisture tolerant, extremely high density and chemically enhanced epoxy based product which prevents capillary infiltration of oil and other chemicals from the ground. Applied in one coat, SG2 reduces the passage of water vapor and moisture through slabs and walls, thus eliminating delamination of adhesives, floor coverings and coatings.
Other characteristics
- Brand
- VAPORTIGHT COAT
- Features
Alkali Resistant, Chemical Resistant, Gas Barrier, Good Adhesion, Good Bonding Strength, Low VOC, Microbe Resistant, Moisture Resistant
- Product Type
- 2K (2 component) Coating, Epoxy Coating
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Note
Installer is responsible for proper product application. Site visits by Aquafin personnel or representatives are solely for the purpose of making technical recommendations, not for providing supervision or quality control. This product is not sold to the Do-it-Yourself market. For Professional Use Only.
- Safety
Part A - irritant; sensitizer - contains epoxy resins. Part B - corrosive; sensitizer - contains amines. Avoid contact with skin and eyes and prolonged inhalation. Wear chemical resistant gloves and safety goggles. After contact with skin, wash immediately with water and soap and rinse thoroughly. In case of eye contact, rinse opened eye for several minutes under running water and immediately seek medical advice. After inhalation supply fresh air and call doctor for safety reasons. Use NIOSH/ MSHA approved vapor respirator in poorly ventilated areas. KEEP OUT OF REACH OF CHILDREN. recommendations are based on Industry Standards and testing procedures. We assume no warranties either written, expressed or implied as to any specific methods of application or use of the product. AQUAFIN, INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. shall not be liable for damages of any sort including remote or consequential damages, down time, or delay. Contact Aquafin for information on extended warranty's. Spills: Ventilate area. Contain and collect spillage with noncombustible, absorbent materials (i.e. sand, vermiculite, universal binders, sawdust, etc.) and place in container for disposal. Emergency procedures are not required. Dispose of in accordance with current local, state and federal regulations. VOC limit: This product is well below the allowable EPA limits as stated in 40 CFR Part 59. LIMITED WARRANTY: AQUAFIN, INC. warrants its products to be manufactured free of defects for one year and to be consistent with its standard high quality. We will replace or, at our election, refund the purchase price of, any product which is proven to be defective, provided that the product was properly applied. Our product recommendations are based on Industry Standards and testing procedures. We assume no warranties either written, expressed or implied as to any specific methods of application or use of the product. AQUAFIN, INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. shall not be liable for damages of any sort including remote or consequential damages, down time, or delay. Contact Aquafin for information on extended warranty's.
- Markets
- Building & Construction
- Flooring
• If the flooring system requires a primer over concrete, it should also be used over the broadcasted SG2. • Water or solvent based adhesives may require a cementitious underlayment (see Aquafin LEVEL-Ultra TDS) of a minimum 1/8" (3 mm) thickness to absorb excess moisture/solvent (check with adhesive manufacturer). • Pressure sensitive adhesives installed directly over SG2 require a longer "tack" time than listed on manufacturer's literature to prevent adhesive moisture or solvent entrapment. • Many flooring systems require a more level or smooth surface. In such cases an application of a self-leveling cementitious underlayment (minimum 1/8" (3 mm) thickness) is required to provide a proper substrate for the floor covering and the adhesive (See Aquafin LEVEL-Ultra TDS).
- PACKAGING
2.2 gal kit = 33 lbs (8.5 L = 15 kg), which contains: • A-Comp: 1.8 gal/29.5 lb (6.7 L/13.39 kg) (resin) • B-Comp: 0.4 gal/3.5 lb (1.8 L/1.61 kg) (hardener). Shelf life is 2 years in closed, original packaging, stored in a dry, cool place.
- Advantages
• Low VOC and meets USDA/FSIS guidelines • High chemical and alkalinity (pH 14) resistance • Barrier against radon & other gasses • Excellent adhesion to steel • Compatible with most flooring systems • Minimal downtime - flooring system installed next day • Does not support mold growth • Protects non-breathable floor coverings/coatings from water vapor transmission through concrete substrates. • Full broadcast system - provides excellent substrate for bonding • Seals oil contaminated slabs • For slabs with MVER up to 25 lbs and RH up to 100% • Can be applied to 5 day old concrete and damp concrete slabs
- Shelf LIfe
2 years in closed, original packaging, stored in a dry, cool place.
