VAPORTIGHT COAT® SG3

Other characteristics

Brand

VAPORTIGHT COAT

Features

Low Odor, Low Viscosity, Moisture Resistant

Product Type

2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating

Application Area

Roofing Membranes

Compatible Substrates & Surfaces

Concrete, Plastics, Wood

Note

Installer is responsible for proper product application. Site visits by Aquafin personnel or representatives are solely for the purpose of making technical recommendations, not for providing supervision or quality control. This product is not sold to the Do-it-Yourself market. For Professional Use Only.

Safety

Part A - irritant; sensitizer - contains epoxy resins. Part B - corrosive; sensitizer - contains amines. KEEP OUT OF REACH OF CHILDREN. Spills: Ventilate area. Contain and collect spillage with noncombustible, absorbent materials (i.e. sand, vermiculite, universal binders, sawdust, etc.) and place in container for disposal. Emergency procedures are not required. Dispose of in accordance with current local, state and federal regulations. VOC limit: This product is well below the allowable EPA limits as stated in 40 CFR Part 59. LIMITED WARRANTY: AQUAFIN, INC. warrants its products to be manufactured free of defects for one year and to be consistent with its standard high quality. We will replace or, at our election, refund the purchase price of, any product which is proven to be defective, provided that the product was properly applied. Our product recommendations are based on Industry Standards and testing procedures. We assume no warranties either written, expressed or implied as to any specific methods of application or use of the product. AQUAFIN, INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. shall not be liable for damages of any sort including remote or consequential damages, down time, or delay. Contact Aquafin for information on extended warranty's.

Show in full

Markets

Building & Construction

Flooring

• Water or solvent based adhesives may require a cementitious underlayment (see Aquafin LEVEL-Ultra TDS) of a minimum 1/8" (3 mm) thickness to absorb excess moisture/solvent (check with adhesive manufacturer). • Pressure sensitive adhesives installed directly over SG3 require a longer "tack" time than listed on manufacturer's literature to prevent adhesive moisture or solvent entrapment. • Many flooring systems require a more level or smooth surface. In such cases an application of a self-leveling cementitious underlayment (minimum 1/8" (3 mm) thickness) is required to provide a proper substrate for the floor covering and the adhesive (See Aquafin LEVEL-Ultra TDS). • Do not apply flooring system if SG3 surface is wet due to dew point or other causes.

Show in full

PACKAGING

• 0.24 gal/2.2 lb (0.9 L/1.0 kg) kit. (special order only) • 2.4 gal/22 lb (9.2 L/10 kg) kit. A-Comp: 1.5 gal/14.48 lb (5.8 L/6.58 kg) B-Comp: 0.9 gal/7.52 lb (3.4 L/3.42 kg). Special order size: • 7.3 gal/65.59 lb (27.5 L/30 kg) kit. A-Comp: 4.6 gal/41.06 lb (17.3 L/18.87 kg) B-Comp: 2.7 gal/24.53 lb (10.2 L/11.13 kg).

Show in full

Advantages

• One coat system - No sand broadcast • Low viscosity, solvent free, no VOC's • For slabs with MVER up to 25 lbs and RH up to 100% • ASTM E 96 perm rating ≤0.10 • Flooring system installed next day • Can be applied to damp & green concrete (min. 5 days old) • High alkalinity barrier (pH 14) • Compatible with most flooring systems • Does not support mold growth • Great for indoor applications: low odor and non-flammable. • SG3 passed Indoor Air Quality Material Emissions Test as per DIN EN ISO 16000 (Report CT-10-06-22-01:250005/2-3)

Show in full

Shelf LIfe

2 years in closed, original packaging, stored in a dry, cool place.