AQUAFIN® 1K
AQUAFIN® 1K is a cement-based, polymer modifi ed, waterproof coating. Mixed with water it forms a dense, rigid surface barrier. It consists of portland cement, well raded quartz sand and polymer enhanced chemical ingredients.
Other characteristics
- Brand
- AQUAFIN
- Features
Freeze/Thaw Stability, Good Barrier Properties, Hydrostatic Strength, Non-Toxic, Odorless
- Product Type
- 1K (1 component) Coating
- Application Area
- Potable Water Applications, Tanks
- Compatible Substrates & Surfaces
- Brick, Concrete
- Note
Installer is responsible for proper product application. Site visits by Aquafin personnel or representatives are solely for the purpose of making technical recommendations, not for providing supervision or quality control.
- Curing
Keep moist for at least 3 days in hot and/or dry environments and 7 days for use in contact with potable water. Provide air circulation for 24 hrs. following the AQUAFIN-1K treatment in poorly ventilated areas and deep pits, etc. Stagnant air will prolong the setting time and/or proper hardening. Use de-humidifiers in indoor areas where condensation exists or appears until AQUAFIN-1K has properly set. During winter time, do not use un-controlled direct air blowing gas or oil heaters to keep air warm.
- Mixing
Approximate mixing ratio (by volume) is: 5 parts powder to 2 parts water or 50 lb powder to 1.6 - 1.7 gal water (22.7 kg to 6.0 - 6.4 L) (Spray application up to 2.0 gal (7.6 L).). Add the AQUAFIN-1K powder to water and mix for at least 3 minutes with a mechanical mixer to a creamy slurry consistency for brush or broom and to a pumpable consistency for spray applications.
- Safety
KEEP OUT OF REACH OF CHILDREN. LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period of one year from the date of installation to be manufactured free of defects and to be consistent with its technical properties as stated in our current Technical Data Sheet. This product must be used as directed and within its stated shelf life. AQUAFIN, INC. will replace or at our discretion refund the purchase price of any product, excluding cost of labor, which is proven to be defective. Our product recommendations are based on industry standards and testing procedures. It is the buyer's obligation to test the suitability of the product for an intended use prior to using it. We assume no warranties written, expressed or implied as to any specific methods of application or use of the product. AQUAFIN, INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. AQUAFIN, INC. shall not be liable for damages of any sort including remote or consequential damages, down time, or delay. Any claim for a defective product must be filed within 30 days of discovery of a problem, and must be submitted with written proof of purchase.
- Markets
- Building & Construction
- Industrial
- Clean Up
Clean tools and equipment with water immediately after use. Cured material can only be removed mechanically.
- PACKAGING
AQUAFIN-1K (gray or white) is supplied in 50 lbs. (22.7 kg) bags or pails
