AQUAFIN® IC (IntegraCoat)
AQUAFIN® IC (IntegraCoat) is a state-of the art one component, penetrating cementitious material which waterproofs and protects new or old structurally sound concrete. It resists strong hydrostatic pressure and is not a vapor barrier (allows concrete to “breathe”). AQUAFIN-IC is powered by Aquafin‘s advanced crystalline technology which chemically reacts with moisture and free lime to reduce the water absorption of the resultant cement matrix within the concrete. This is a result of the formation of nano-scale crystals by the active catalysts present in the capillary system. This sustains a durable waterproof effect in the concrete, thereby blocking the passage of water. This reaction will continue to take place anytime water is present for the life of the concrete structure where by making the AQUAFIN-IC a truely permanent and integral waterproofing solution. The AQUAFIN-IC nano-crystals will also grow in and along static hairline crack sealing them and preventing further incoming water.
Other characteristics
- Brand
- AQUAFIN
- Features
Breathable, Cost Effective, Durable, Hydrostatic Strength, Low Water Absorption, Non-Toxic, Salt Resistance, Water Resistant
- Product Type
- 1K (1 component) Coating
- Application Area
- Potable Water Applications, Tanks
- Compatible Substrates & Surfaces
- Concrete
- Note
Installer is responsible for proper product application. Site visits by Aquafin personnel or representatives are solely for the purpose of making technical recommendations, not for providing supervision or quality control.
- Safety
Refer to Safety Data Sheet (SDS). The use of a dust mask, safety goggles and gloves is recommended. This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. Dispose of water and materials in accordance with Federal, State and Local regulations. Keep out of the reach of children. LIMITED WARRANTY: AQUAFIN, INC. warrants this product for a period of one year from the date of installation to be manufactured free of defects and to be consistent with its technical properties as stated in our current Technical Data Sheet. This product must be used as directed and within its stated shelf life. AQUAFIN INC. will replace or at our discretion refund the purchase price of any product, excluding cost of labor, which is proven to be defective. Our product recommendations are based on industry standards and testing procedures. It is the buyer's obligation to test the suitability of the product for an intended use prior to using it. We assume no warranties written, expressed or implied as to any specific methods of application or use of the product. AQUAFIN INC. MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. AQUAFIN, INC. shall not be liable for damages of any sort including remote or consequential damages, down time, or delay. Any claim for a defectiveproduct must be filed within 30 days of discovery of a problem, and must be submitted with written proof of purchase.
- Markets
- Building & Construction
- Industrial
- PACKAGING
- 50 lb. (22.7 kg) bags or pails.
- Advantages
• Advanced crystalline technology that penetrates deep into concrete • Potable water approved - NSF/ANSI 61 • Applied to moist (damp) substrate • Environmentally friendly, norganic - non toxic, zero VOC's • Permanently active • Easy to use - needs only water for mixing • Can be applied to green concrete as soon as forms are stripped • Protects concrete against fresh water, salt water, waste water & aggressive ground water • Resists strong hydrostatic pressure • Applied to positive or negative side water pressure • Seals and post seals shrinkage cracks, up to 1/64" (0.4 mm) • Contains no chlorides • Cost effective
- Application
• Do not apply AQUAFIN-IC at temperatures below 40° F (5°C) or to a frozen substrate. For temperatures of 90°F (32°C) and above consult our office. • Do not apply to a dry substrate. • Use AQUAFIN-1K for brick or stone substrates
- Leed Points
MR Credit 5.1, Regional Materials..........................Up to 2 Points IEQ Credit 4.2, Low-Emitting Materials Paints and Coatings...1 Point Using this AQUAFIN product can help contribute to LEED certification of projects in the categories shown above.
- Certified
NSF/ANSI Standard 61 see www.wqa.org for use restrictions
- Technology
- Ready-to-Use Products
- Labeling Claims
- Environmentally Friendly
- VOC-free
