To catalogue
Farboset® 9081
- Chemical Family
- Epoxy & Epoxy Derivatives
Farboset® 9081 is a nonanhydride epoxy powder coating specifically formulated for low-temperature applications, making it suitable for heat-sensitive electronic components. It is ideal for encapsulating film and ceramic capacitors that require processing at low temperatures. This compound can be applied using various techniques such as fluidized bed coating, wheel coaters, or electrostatic spray methods.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
Electrical & Electronics — Packaging & Assembly
- Electronics Coatings
Product Families
Ready-to-Use Products — Paints & Coatings
- Powder Coatings
Other characteristics
- Brand
- Farboset
- Features
Low Temperature Performance, Thermal Cracking Resistance
- Product Type
- Powder Coating
- Application Area
- Resistors
- Application Method
- Beugler Wheel, Fluid Bed Coating, Spray
- Markets
- Electrical & Electronics
- Shelf LIfe
- 6 months
- Technology
- Ready-to-Use Products
- Application Methods
- Beugler Wheel
- Fluid Bed Coating
- Spray
- Applications
This compound is designed ideally suited for film and ceramic capacitors which need to be processed in low temperatures. It can be applied using fluidized bed, wheel coaters, or electrostatic spray techniques.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Low Temperature Performance
- Thermal Cracking Resistance
Technical data
Table 1 of 4
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Glass Transition Temperature (Tg) | 110.0 | °C |
| Linear Thermal Expansion | 50 x 10⁻⁶ | cm/cm/°C |
| Plate Flow (at 150 °C ,60° angle) | 23.0 | mm |
| Hot Plate Gel Time (at 150 °C) | 35.0 | seconds |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dissipation Factor (1 KHz) | 0.006 | — | ASTM 150 |
| Dielectric Constant (1 KHz) | 4.0 | — | ASTM 150 |
| Dielectric Strength | 900.0 | volts/mil | ASTM 149 |
| Loss Factor (1 KHz) | 0.014 | — | ASTM 150 |
Table 3 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Particle Size (U.S. Mesh, +80 max) | 1.0 | % | — |
| Particle Size (U.S. Mesh, -325) | 27 - 33 | % | — |
| Edge Coverage | 30.0 | % | ASTM D-2967 |
| Cure Time (at 110°C) | 60.0 | minutes | — |
| Cure Time (at 150°C) | 10.0 | minutes | — |
| Molded Density | 1.6 | gm/cc | — |
Table 4 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Water Absorption (at 23 °C, 24 hours) | 0.1 | % |
