To catalogue
Farboset® 9251
- Chemical Family
- Epoxy & Epoxy Derivatives
Farboset® 9251 is a nonanhydride epoxy powder coating designed for applications where fast cure and thermal resistance are essential. This compound is particularly suitable for encapsulating motor iron applications and is recommended for various applications, including meter coils, busways, stators, rotors, and armature insulation. It provides the required thermal resistance and fast curing for these applications.
Product families
Applications
Paints & Coatings — Industrial Coatings
- Coil Coatings
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Encapsulants
Ready-to-Use Products — Paints & Coatings
- Powder Coatings
Other characteristics
- Brand
- Farboset
- Product Type
- Encapsulant, Powder Coating
- Encapsulant
- Powder Coating
- Application Area
- Coils
- Markets
- Paints & Coatings
- Shelf LIfe
- 6 months
- Technology
- Ready-to-Use Products
- Applications
This compound is designed for encapsulation of motor iron applications, and is recommended for meter coils, busways, stators, rotors and armature insulation.
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Fast Cure
- High Temperature Resistance
Technical data
Table 1 of 4
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Glass Transition Temperature (Tg) | 110.0 | °C |
| Linear Thermal Expansion | 55x 10⁻⁶ | cm/cm/°C |
| Plate Flow (at 150 °C ,60° angle) | 35.0 | mm |
| Hot Plate Gel Time (at 200 °C) | 30.0 | seconds |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dissipation Factor (1 KHz) | 0.008 | — | ASTM 150 |
| Dielectric Constant (1 KHz) | 4.0 | — | ASTM 150 |
| Dielectric Strength | 900.0 | volts/mil | ASTM 149 |
| Loss Factor (1 KHz) | 0.032 | — | ASTM 150 |
Table 3 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Particle Size (U.S. Mesh, +80 max) | 1.0 | % | — |
| Particle Size (U.S. Mesh, -325) | 27 - 33 | % | — |
| Edge Coverage | 50.0 | % | ASTM D-2967 |
| Impact Resistance | 160.0 | in/lb direct | — |
| Molded Density | 1.5 | gm/cc | — |
Table 4 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Water Absorption (at 23 °C, 24 hours) | 0.1 | % |
