Manus-Bond 73GP
- Chemical Family
- Silicones
Manus-Bond 73GP is a one component moisture curing silicone elastomeric adhesive/sealant. 73GP is designed for bonding and sealing a wide variety of building materials such as vinyl, glass, steel, aluminum, tile and many plastics. Remains flexible, is non-sag and has exceptional resistance to weathering and temperature extremes. 73GP is mildew resistant when fully cured.
Product families
- Contact Adhesives
Other characteristics
- Brand
- Manus-Bond
- Product Type
- 1K (1 component) Adhesive
- Compatible Substrates & Surfaces
- Aluminum, Glass, Metal, Plastics, Steel
- Markets
- Adhesives & Sealants
- Building & Construction
- Storage
12 months. For maximum shelf life, store unopened product at or below 80ºF.
- Painting
This product is not paintable. If your application requires a paintable sealant, consult Manus Products for recommended alternatives.
- PACKAGING
10.1 and 28 fl.oz. cartridges, 10 and 20 fl.oz. sausage packs, 1, 5, and 52 gallon containers.
- Precaution
Some applications may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications; Building & Construction — Other Building & Construction Applications
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Sausages
- Limited Warranty
Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.
- Surface Preparation
Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying product. Some substrate materials may not be compatible with this product. Testing substrate compatibility with this product before full application is recommended.
- Ready to Use Product Features
- Good Sagging Resistance
- Good Weather Fastness
- High Flexibility
- Mildew Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Glass
- Metal
- Plastics
- Steel
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 0.96 | — | — |
| Skin Time | 15 - 25 | minutes | — |
| Viscosity | 500000.0 | cps | — |
| Elongation | 350.0 | % | — |
| Tensile Strength | 150.0 | psi | — |
| 100% Modulus (Rate = 2”/minute) | 57.0 | psi | — |
| Hardness | 20.0 | — | Shore A |
| Service Temperature | (-50) - 300 | ºF | — |
| VOC Content | 28.0 | gm/ltr | — |
