Manus-Bond 77AM
- Chemical Family
- Polyurethanes (PU)
Manus-Bond 77AM Modified Polyurethane Sealant/Adhesive is based on silylated prepolymer. This "hybrid" system overcomes the limitations of typical polyurethanes without sacrificing performance. 77AM is solvent-free, non-isocyanate and is non-yellowing. 77AM offers superior primerless adhesion to a large variety of substrates and has excellent paintability. Exhibits low dirt pick-up, fast cure and is non-staining on porous surfaces. 77AM has excellent UV resistance and is highly durable in the harshest environments, including chemical resistance to jet fuels and road salts.
Product families
- Contact Adhesives
Other characteristics
- Brand
- Manus-Bond
- Product Type
- Adhesive
- Markets
- Adhesives & Sealants
- Storage
Twelve months in unopened containers at temperatures not exceeding 80°F.
- Painting
Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended.
- PACKAGING
10.1 fl. oz. cartridge, 10.1 and 20 fl. oz. sausage packs, 1 gallon, 2 gallon, 5 gallon and 55 gallon containers.
- Conformity
- Conforms to TTS-0230C and ASTM C920.
- Precaution
Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Sausages
- Labeling Claims
- Isocyanates-free
- Solvent-free
- Limited Warranty
Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.
- Surface Preparation
Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying 77AM. Testing a small area for compatibility is recommended.
- Certifications and Compliance
- USDA Certified
- Ready to Use Product Features
- Chemical Resistant
- Durable
- Fast Cure
- Good Adhesion
- Good Non-Yellowing Properties
- Good UV Resistance
- Primerless
- Stain Resistant
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.50 - 1.54 | — | — |
| Skin Time (75°F & 50%RH) | 20 - 30 | minutes | — |
| Viscosity | 500000.0 | cps | — |
| Elongation | 350.0 | % | — |
| Tensile Strength | 180.0 | psi | — |
| 100% Modulus (Rate = 2”/minute) | 75.0 | psi | — |
| Boeing Flow | 0.0 - 0.1 | — | — |
| Hardness | 35 - 45 | — | Shore A |
| Service Temperature | (-75) - 350 | °F | — |
