Manus-Bond 73-A
- Chemical Family
- Silicones
Manus-Bond 73-A is a one component room temperature curing silicone elastomeric adhesive/sealant. Does not require the addition of activators or catalysts. Especially designed for bonding and sealing a wide variety of structural materials such as glass, steel, aluminum and plastics and has exceptional resistance to weathering and temperature extremes.
Product families
- Contact Adhesives
Other characteristics
- Brand
- Manus-Bond
- Product Type
- 1K (1 component) Adhesive, Structural Adhesive
- 1K (1 component) Adhesive
- Structural Adhesive
- Compatible Substrates & Surfaces
- Aluminum, Glass, Metal, Plastics, Steel
- Markets
- Adhesives & Sealants
- Building & Construction
- Storage
Minimum one year in unopened containers at temperatures not exceeding 80F.
- Painting
Painting is not recommended overany silicone. If your application requires a paintable sealant, consult Manus Products for recommended alternatives.
- PACKAGING
10.3 fl. oz. cartridge, 1 gallon, 5 gallon and 55 gallon containers.
- Conformity
Conforms to Federal Specifications TT-S-0230C and TT-S-01543A. Also conforms to ASTM C920 and AAMA 802.3-92, Types I and II. Clear, white and black, when properly cured, meet the requirements of FDA regulation 21CFR 177.2600.
- Precaution
Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin. Do not take internally.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications; Building & Construction — Other Building & Construction Applications
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Limited Warranty
Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.
- Surface Preparation
Apply to clean, dry surlaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying 73-A.
- Certifications and Compliance
- USDA Certified
- Ready to Use Product Features
- Good Weather Fastness
- Compatible Substrates and Surfaces
- Aluminum
- Glass
- Metal
- Plastics
- Steel
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Complete Cure | 4 days | — | — |
| Tack Free Time | 30.0 | minutes | — |
| Extrusion Rate | 2.0 | Seconds | — |
| Hardness | 25.0 | — | Shore A |
| Weight Loss (Heat Aging) | 3.0 | % | — |
| Stain & Color Change | No staining or vehicle migration | — | — |
| Durability (Aluminum) | No bond loss | — | — |
| Durability (Glass) | No bond loss | — | — |
| Bubble Formation | Conforms | — | — |
| Tensile Strength | 280.0 | psi | — |
| Adhesion in Peel (Glass) | 12.0 | pli | — |
| Adhesion in Peel (Aluminum) | 15.0 | pli | — |
