Manus-Bond 75-AM Industrial
- Chemical Family
- Polyethers
Manus-Bond 75-AM Industrial Grade exhibits excellent adhesion to many substrates including aluminum, brass, steel, Kynar®, Galvalume®, painted surfaces, vinyl, glass, granite, marble, wood and many plastics. Cures fast, even at low temperatures. 75-AM Industrial Grade is highly weather resistant and can be painted with most paints. Manufactured from high grade polyether technology 75-AM contains no solvents or isocyanates and is non-yellowing.
Product families
Applications
- Industrial Adhesives & Sealants
- Other Industrial & Assembly Applications
Product Families
- Contact Adhesives
Other characteristics
- Brand
- Manus-Bond
- Product Type
- Adhesive
- Compatible Substrates & Surfaces
Aluminum, Brass, Glass, Marble, Metal, Painted Surfaces, Plastics, Steel, Wood
- Markets
- Adhesives & Sealants
- Industrial
- Storage
For maximum shelf-life, store unopened product at or below 80ºF.; 9 months = Cartridges and sausage packs.; 6 months =1, 5 and 55 gallon containers.
- Painting
Cured 75-AM may be painted with most industrial & consumer paints. Testing prior to painting is recommended.
- PACKAGING
10.1 fl. oz. cartridges, 10 & 20 fl. oz. sausage packs, 1, 5, & 55 gallon containers.
- Conformity
Conforms to ASTM C920, Type S, Grade NS, Class 50, Use T, NT, I, G and A. AAMA 802.3 Type II Back Bedding Compound.
- Precaution
Some applications may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin.
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Sausages
- Labeling Claims
- Isocyanates-free
- Non-Corrosive
- Solvent-free
- Limited Warranty
Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.
- Surface Preparation
Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying 75-AM. Some substrate materials may not be compatible with this product. Testing substrate compatibility with this product before full application is recommended.
- Certifications and Compliance
- USDA Certified
- Ready to Use Product Features
- Fast Cure
- Good Non-Yellowing Properties
- Good Sagging Resistance
- Good Weather Fastness
- Compatible Substrates and Surfaces
- Aluminum
- Brass
- Glass
- Marble
- Metal
- Painted Surfaces
- Plastics
- Steel
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tack Free Time (77°F & 50%RH) | max. 60 | minutes | — |
| Skin Time (75°F & 50%RH) | max. 30 | minutes | — |
| Sag | Non-Sagging | — | — |
| Tensile Strength | 225.0 | psi | — |
| Lap Shear (Rate = 2”/minute) | 275.0 | psi | — |
| Elongation | 275.0 | % | — |
| High Temp Resistance (short periods) | max. 300 | °F | — |
| Low Temperature Resistance | -75.0 | °F | — |
| Hardness | 45 - 50 | — | Shore A |
| UV Resistance (after 2000hrs) | UV-A no change in appearance or physical properties | — | ASTM G26 |
| Corrosive Properties | Non-corrosive | — | — |
| Staining | Non-staining | — | — |
