Manus-Bond 34HP
- Chemical Family
- Polyethers
Manus-Bond 34HP is a paintable, fast curing adhesive/sealant formulated to exhibit superior adhesion and flexibility to a wide variety of substrates including: PVC, aluminum, stainless steel, galvanized steel, wood, FRP, marble, stone and many plastics. 34HP does not contain solvents and does not contain isocyanates. 34HP will not crack, peel or shrink. This product has excellent UV resistance.
Product families
- Contact Adhesives
Other characteristics
- Brand
- Manus-Bond
- Product Type
- Adhesive
- Compatible Substrates & Surfaces
Aluminum, Marble, Metal, Plastics, Steel, Stone, Wood
- Markets
- Adhesives & Sealants
- Storage
For maximum shelf-life, store unopened product at or below 80ºF.; 9 months = Cartridges and sausage packs.; 6 months =1, 5 and 55 gallon containers.
- Painting
Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended.
- PACKAGING
10.3 fl.oz. cartridge, 10.3 and 20 fl.oz. sausage packs, 1 gallon, 5 gallon and 55 gallon containers.
- Conformity
Complies with AAMA 802.3-07, Type II Back Bedding Glazing Compound.
- Precaution
Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Sausages
- Labeling Claims
- Isocyanates-free
- Solvent-free
- Limited Warranty
Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.
- Surface Preparation
Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying product. Testing a small area for compatibility is recommended.
- Certifications and Compliance
- USDA Certified
- Ready to Use Product Features
- Crack Resistant
- Fast Cure
- Good Adhesion
- Good Shrinkage Resistance
- Good UV Resistance
- High Flexibility
- Compatible Substrates and Surfaces
- Aluminum
- Marble
- Metal
- Plastics
- Steel
- Stone
- Wood
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.50 - 1.56 | — | — |
| Skin Time (75°F & 50%RH) | 30 | minutes | — |
| Viscosity (Spindle T-E at 5 rpm) | 600000.0 | cps | — |
| Elongation (Rate = 2”/minute) | 275.0 | % | — |
| Tensile Strength (Rate = 2”/minute) | 225.0 | psi | — |
| Lap Shear (Rate = 2”/minute) | 250.0 | psi | — |
| Hardness | 45.0 | — | Shore A |
| Service Temperature | (-75) - 350 | °F | — |
