Manus-Bond Flex-Weld 5
- Chemical Family
- Epoxy & Epoxy Derivatives
Manus-Bond Flex-Weld 5 is an all-purpose, modified epoxy that provides excellent tensile, peel and shear strength. Exhibits superior adhesion and flexibility to a wide variety of substrates including: ceramics, concrete, wood, composites, FRP and most metals-without the use of a primer. Flex-Weld has a user-friendly and forgiving 1:1 by volume mix ratio. Light stable and highly UV resistant. Flex-Weld outperforms most “brittle” 2-component systems by retaining high peel strength and flexibility through a wide temperature range.
Product families
- Contact Adhesives
Other characteristics
- Brand
- Manus-Bond
- Product Type
- 2K (2 component) Adhesive, Epoxy Adhesive
- 2K (2 component) Adhesive
- Epoxy Adhesive
- Compatible Substrates & Surfaces
- Ceramic, Concrete, Metal, Plastics, Wood
- Markets
- Adhesives & Sealants
- Storage
6 Months. For maximum shelf life, store unopened product between 65ºF – 80ºF. Part B is cold storage sensitive. Do not store below 65ºF for more than 1 week.
- Painting
Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended.
- PACKAGING
- 55 gallon drums.
- Precaution
Some applications may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin.
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Limited Warranty
Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.
- Surface Preparation
Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying product. Some substrate materials may not be compatible with this product. Testing substrate compatibility with this product before full application is recommended.
- Ready to Use Product Features
- Good Adhesion
- Good Light Stability
- Good UV Resistance
- High Flexibility
- High Tensile Strength
- Primerless
- Wide Temperature Operating Range
- Compatible Substrates and Surfaces
- Ceramic
- Concrete
- Metal
- Plastics
- Wood
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Work Time | 5.0 | minutes | — |
| Open Time | 10.0 | minutes | — |
| Ultimate Peel Strength | 50.0 | pli | — |
| Hardness | 85.0 | — | Shore A |
| Tensile Strength | 825.0 | psi | — |
| Lap Shear | 800.0 | psi | — |
| Elongation | 70.0 | % | — |
| Blended Color | Gray | — | — |
| Service Temperature | (-75) - 350 | °F | — |
