Manus-Bond 75AM Fast Cure
- Chemical Family
- Polyethers
Manus-Bond 75AM Fast Cure (N33-1) is an environmentally friendly, VOC compliant, moisture curing hybrid elastomeric adhesive/sealant. 75AM Fast Cure (N33-1) is designed for primerless adhesion to most common trailer and construction assembly substrates. This product is fast cure, high strength and remains flexible in low temperature extremes. 75AM Fast Cure (N33-1) does not contain solvents or isocyanates. The ease of one-part makes 75AM Fast Cure (N33-1) the perfect choice for both manufacturing and repair.
Product families
Applications
- Body Shop & Repair
- Transportation Assembly
Product Families
- Contact Adhesives
Other characteristics
- Brand
- Manus-Bond
- Product Type
- Adhesive
- Markets
- Automotive & Transportation
- Storage
For maximum shelf-life, store unopened product at or below 80ºF.; 9 months = Cartridges and sausage packs.; 6 months =1, 5 and 55 gallon containers.
- Painting
Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended.
- PACKAGING
10.1 and 28fl.oz. cartridges, 10 and 20 fl.oz. sausage packs, 1, 5 and 55 gallon containers.
- Precaution
Some applications may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin.
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Sausages
- Labeling Claims
- Environmentally Friendly
- Isocyanates-free
- Solvent-free
- Limited Warranty
Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling and storage.
- Surface Preparation
Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying product. Some substrate materials may not be compatible with this product. Testing substrate compatibility with this product before full application is recommended.
- Certifications and Compliance
- USDA Certified
- Ready to Use Product Features
- Fast Cure
- Good UV Resistance
- High Strength
- Low Temperature Flexibility
- Low VOC
- Primerless
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.38 - 1.42 | — | — |
| Skin Time (75°F & 50%RH) | max. 30 | minutes | — |
| Viscosity | 650,000-750,000 | cps | — |
| Elongation | 300.0 | % | — |
| Tensile Strength | 350.0 | psi | ASTM D412 |
| 100% Modulus (Rate = 2”/minute) | 200.0 | psi | ASTM D412 |
| Peel Strength | 35.0 | pli | ASTM C794 |
| Hardness | 45 - 50 | — | Shore A |
| Service Temperature | (-75) - 350 | °F | — |
| UV Resistance | Excellent | — | ASTM G26 |
| VOC Content | 14.0 | gm/ltr | — |
| Lap Shear (Rate = 2”/minute) | 325.0 | psi | — |
