BONDiT™ B-4682
BONDiT™ B-4682 is a two-part, state-of-the-art 100% solids, room-temperature curing, very flexible epoxy resin system. Especially designed for adhesive and potting applications in bonding to unprepped engineering plastics and elastomers to various substrates. Bondable plastics include --UHMW, HDPE, PP, PET (Ertalite & Mylar), PEEK, PPS, PBT (Valox) Acetal (Delrin), PTFE (Teflon), ETFE (Tefzel), PVC, PVCF, PVDF (Kynar), ABS, ECTFE (Halar), polyamide and polyimide (Ultem & Torlon), fiberglass and composites. Elastomers include EPDM, butyl, neoprene, urethanes, and some thermoplastic elastomers (Hytrel). The B-4682 will bond these materials to metals, glass, ceramic, cement, wood and cellulose substrates, as well as to each other.
Product families
- Protective Coatings
Other characteristics
- Brand
- BONDiT
- Features
Acid Resistant, Alkali Resistant, Chemical Resistant, Detergent Resistant, Excellent Fuel Resistance, Excellent Substrate Adhesion, Exceptional Peel, Flexible, Good Moisture Resistance, Good Weather Stability, High Impact Resistance, High Tensile Strength, Improved Flexibility, Oil Resistant, Primerless, Tacky
- Product Type
2K (2 component) Coating, Pressure Sensitive Adhesive, Solvent free (100% Solids) Adhesive, Solvent free (100% Solids) Sealant; 2K (2 component) Coating; Pressure Sensitive Adhesive; Solvent free (100% Solids) Adhesive; Solvent free (100% Solids) Sealant
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
Composites, Elastomers & Rubbers, Glass, Plastics
- Markets
- Adhesives & Sealants
- Electrical & Electronics
- Storage
The usable shelf life of unopened containers of BONDiTTM B-4682 resin is one year, and should be stored in cool, dry place. When not in use, containers should be kept tightly closed. BONDiTTM B-4682 is available in side-by-side handheld and pneumatic actuated gun cartridges, quarts, gallons, pails and drums. Custom packaging, such as premixed and degassed frozen cartriges, is also available.
- Easy to Use
Two-part, primerless, highly flexible epoxy, ambient and thermal cure. Low HAZMAT impact. Excellent sealant for electronic and electrical encapsulation for harsh environments.
- Cure
- Heat Cure
- Curing Guide
A wide range of curing regimes may be employed: ambient set in 6 hours, tack free in 20 hours, and 95% cure in 2 days; will cure 98% in 4 hours at 200°F. Mix part A with part B, 1:1 ratio by volume or weight. Degassing is optional. Pot life is typically 90 minutes, at ambient temperature. Optional: Surface prep by abrading or grit blasting substrates with #100 AlOx followed by degrease and/or alcohol wipe will increase adhesion. Apply B-4682 by roller or brush.
- Product Info
As an electrical encapsulant /sealant B-4682 offers very high shock isolation and protection of sensitive electronics from loads derived from extreme thermal cycling, (- 65°C to 150°C) as well as mechanical shock and vibration. B-4682 has been successful in military aircraft applications for sealing exterior electronic sensors. B-4682 handles harsh environments and is particularly effective against moisture, salt water, acids, alkalies, oils, fuels and detergents. The highly flexible (200% elongation) properties of B-4682 permits assembly of materials with extreme dissimilar thermal expansion properties to survive thermal cycling. Likewise mechanical vibration, shock and impact are easily absorbed by B-4682. B-4682 is particularly useful for assembly of low surface energy substrates such as Delrin to itself and an almost unlimited list of other materials, while offering an excellent balance between material strength, peel, shear and tensile bond strengths, chemical resistance, and environmental resistance. This product works very well as a waterblock sealant for cable and transducer terminations that withstands years of submersion in deep-sea and other harsh chemical environments. Operational temperatures are from -65°C to 150°C, above which it will soften considerably, but not flow as it is a crosslinked epoxy system. B-4682 is very easy to use with low HAZMAT impact as a 100% solids epoxy system— no plasticizers that bloom to the surface and no solvents causing VOC problems. The product is also availble in a thixotropic silcate filled version B-4682TH which can be applied to vertical surfaces without sagging, or in paste or electrically conductive form.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Plasticizer-free
- Solvent-free
- VOC-free
- Application Methods
- Brush
- Roller
- Harsh Environments
Marine,Civil Engineering, Industrial, Downhole oil, Underwater, Mining, Industrial,, Automotive.
