BONDiT™ B-482
- Chemical Family
- Epoxy & Epoxy Derivatives
BONDiT™ B-482 is a two-part, state-of-the-art 100% solids, room-temperature curing flexible epoxy resin system. Especially designed for potting, coating, and adhesive applications for electronics and electrical assemblies, environmental sealing, hard coating for corrosion resistance, bonding engineering plastics and elastomers to various substrates.
Other characteristics
- Brand
- BONDiT
- Cure Method
- Air Dry, Heat Cure
- Product Type
2K (2 component) Adhesive, 2K (2 component) Coating, 2K (2 component) Sealant, Contact Adhesive, Encapsulant, Epoxy Coating, Potting Compound, Solvent free (100% Solids) Adhesive, Solvent free (100% Solids) Sealant, Solventless & High Solids Coating, Structural Adhesive, Structural Sealant; 2K (2 component) Adhesive; 2K (2 component) Coating; 2K (2 component) Sealant; Contact Adhesive; Encapsulant; Epoxy Coating; Potting Compound; Solvent free (100% Solids) Adhesive; Solvent free (100% Solids) Sealant; Solventless & High Solids Coating; Structural Adhesive; Structural Sealant
- Application Area
Electrical Components, Marine Applications, Mining Operations
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Composites, Concrete, Elastomers & Rubbers, Glass, Metal, Plastics
- Markets
- Adhesives & Sealants
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Paints & Coatings
- Storage
The usable shelf life of unopened containers of BONDiTTM B-482 resin is one year, and should be stored in cool, dry place. When not in use, containers should be kept tightly closed. BONDiTTM B-482 is available in side-by-side handheld and pneumatic actuated gun cartridges, quarts, gallons, pails and drums. Custom packaging, such as premixed and degassed frozen cartridges, is also available.
- Easy to Use
Two part, primerless, semi-rigid epoxy, high tensile strength, ambient and thermal cure. Available in handheld and pneumatic gun actuated cartridges, quarts, gallons and drums.
- Cure
- Air Dry
- Heat Cure
- Curing Guide
A wide range of curing regimes may be employed: ambient set in 6 hours, tack free in 12 hours, and 95% cure in 24 hours; cure at 150°F tack free in 2 hours 98% in 4 hours; or 3 hours full cure at 200°F with no ambient incubation time. Mix part A with part B, 2:1 ratio by volume or weight. Degassing is optional. Pot life is typically 40 minutes, at ambient temperature. Surface prep by abrading or grit blasting substrates with #100 AlOx followed by degrease and/or alcohol wipe.
- Product Info
B-482 handles harsh environments easily and is particularly effective against moisture, salt water, acids, alkalies, oils, and detergents. B-482 has high thermal stability, readily handling 350°F continuous. B-482 offers good corrosion resistance. The intrinsic flexible resin properties of B-482 permit assembly of materials with dissimilar thermal expansion and survive thermal cycling. Yet it offers high tensile strength with the flexibility. Likewise mechanical vibration, shock and impact are easily absorbed by B-482 and while protecting surfaces, bonded assemblies and encapsulated sensitive electronics. The B-482 system is often superior in performance to urethane adhesives, sealants and coatings. B-482 is unfilled and low viscosity, while B-482TH is silicate filled and thixotropic, meaning a thick coating on vertical surfaces will not sag, but is easily poured from a can. Apply B-482 by roller or brush. B-482 is very easy to use with low HAZMAT impact as a 100% solids epoxy system--no plasticizers that bloom to the surface and no solvents causing VOC problems. B-482 as the unfilled version is most useful for potting and clear coating applications to replace urethanes while the filled version B-482TH is most useful as an adhesive
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Pails
