BONDiT™ C-6
BONDiT™ C-6 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-6 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is used as a primer coat for other BONDiT™ coatings and encapsulants.
Other characteristics
- Brand
- BONDiT
- Functions
- Adhesion Promoter, Coupling Agent
- Product Type
1K (1 component) Coating, Hot Melt Adhesive, Primer; 1K (1 component) Coating; Hot Melt Adhesive; Primer
- Application Method
- Brush, Dip Coating, Roller, Spray
- Markets
- Adhesives & Sealants
- Automotive & Transportation
- Healthcare & Pharma
- Industrial
- Paints & Coatings
- Printing & Packaging
- Storage
The usable shelf life of unopened containers of BONDiTTM C-6 resin is one year, and should be stored in cool, dry place. When not in use, containers should be kept tightly closed after purging with dry nitrogen (optional). BONDiTTM C-6 is available in syringes, cans, bulk container, and custom packaging
- Coating Type
- 1K (1 component) Coating
- Primer
- Curing Guide
A wide range of curing regimes may be employed. Typical cure is ambient 30 to 60 minutes, or 75°C for 15 minutes, or 150°C (302°F) for 5 minutes. May be brushed, sprayed, or poured. Wetting qualities are superior, even on non-polar surfaces.
- Technology
- CASE Ingredients
- Ready-to-Use Products
- Packaging Type
- Cans
- Easyapplication
A one-part, one coat, thin film, rapid ambient or thermal cure primer. Offers a long three-week work-life on cured prime coat. Dip, spray, brush, and roll application
- Application Methods
- Brush
- Dip Coating
- Roller
- Spray
- Applications Notes
BONDiTTM C-6 is very cost effective in promoting excellent adhesion with polar and non-polar coatings and substrates. Suitable for acrylic, alkyd, epoxy, urethane, and polysulfide coatings and sealants for exterior and marine evinroments. Good for roll coating, and hotmelt automotive applications. Diverse adhesive combinations of dissimilar materials with significant environmental resistance are obtained when used with other BONDiTTM products
