Roadsaver 514
Crafco RoadSaver 514 sealant is a hot-applied, asphalt based product used to seal cracks or joints in asphalt or Portland cement concrete pavements in cold climates. RoadSaver 514 is supplied in solid form which when melted and properly applied forms a resilient, adhesive and flexible compound that has a high degree of elongation at low temperatures while resisting flow during the summer. RoadSaver 514 can be used in highway, street and airfield pavements and is applied to pavement cracks or joints using either pressure feed melter applicators or pour pots. At application temperature, it is a free flowing, self-leveling product. RoadSaver 514 is produced for requirements of the Kansas Department of Transportation for crack sealant. RoadSaver 514 has been a quality Crafco product for over 20 years. Due to the softness of the product, RoadSaver 514 is not recommended for use as crack sealant in parking lots or other areas with high levels of foot traffic.
Product families
Applications
- Pavement Highways Roads & Bridges
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- Roadsaver
- Product Type
- Hot Melt Sealant
- Compatible Substrates & Surfaces
- Asphalt, Concrete
- Markets
- Building & Construction
- PACKAGING
Product is supplied in either cardboard boxes, or in meltable boxless packaging. Both package types are labeled in accordance with OSHA, GHS, and specification requirements; are sold by net weight; are interlock stacked on 48 x 40 in. (122 x 102 cm) 4-way pallets; can be stored outside; and are covered with a weather resistant pallet cover and 2 layers of UV protected stretch wrap.; BOX packaging consists of cardboard boxes containing 30 lbs. (13.6 kg) of product with 75 boxes per pallet, weighing approximately 2250 lbs. (1020 kg). Boxes contain a quick melting release film for easy removal and are taped closed, without any staples.; PLEXI-melt packaging consists of 30 lb. (13.6 kg) blocks of product with 70 packages per pallet, weighing 2100 lb. (952 kg). To use, the pallet wrap is removed, and individual blocks are placed in the melter. There are no cardboard boxes or other cardboard components to open, empty, handle, or dispose of. PLEXI-melt packaging quickly melts into the product without affecting specification conformance.
- Installation
The unit weight of Crafco RoadSaver 514 is 10.5 lbs. per gallon (1.26 kg/L) at 60°F (15.5°C). Prior to use, the user must read and follow Installation Instructions for Hot-Applied RoadSaver, PolyFlex, Parking Lot and Asphalt Rubber Products to verify proper product selection, heating methods, pavement preparation procedures, application geometry, usage precautions and safety procedures. These instructions are provided with each pallet of product.
- Technology
- Ready-to-Use Products
- Packaging Type
- Boxes
- Labeling Claims
- VOC-free
- Specification Conformance
RoadSaver 514 is specifically formulated and produced to meet requirements of the State of Kansas specification 90P/M-192 for hot-applied crack sealant and joint sealing compound.
- Ready to Use Product Features
- Flexible
- Free Flowing
- Good Adhesion
- High Elongation
- High Performance
- Resilient
- Self-Leveling
- Compatible Substrates and Surfaces
- Asphalt
- Concrete
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bond (-20°F, 200% ext.) | Pass 3 Cycles | — | — |
| Cone Penetration (0°F) | 18 - 80 | — | — |
| Flow (140°F) | max. 5 | mm | ASTM D5329 |
| Maximum Heating Temperature | 400.0 | °F | — |
| Minimum Application Temperature | 380.0 | °F | — |
| Pot Life | min. 12 | hour | — |
| Reheatability | Pass | — | — |
| Resilience (77°F) | 50 - 80 | % | ASTM D5329 |
