Roadsaver 222
Crafco RoadSaver 222 sealant is a hot-applied asphalt-based product used to seal and fill cracks and joints in asphalt or Portland cement concrete pavements in hot to cold climates. RoadSaver 222 is supplied in solid form which when melted and properly applied forms a resilient, adhesive, and flexible compound that resists cracking in the winter and resists flow at summer temperatures. RoadSaver 222 is used in highway, street, and airfield pavements and is applied to pavement cracks and joints using either pressure feed Melter applicators or pour pots. At application temperature, RoadSaver 222 is free flowing and self-leveling. RoadSaver 222 is produced to meet ASTM D6690 Type III and Federal Specification SS-S-1401C and has been a quality Crafco product for over 30 years.
Product families
Applications
- Pavement Highways Roads & Bridges
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- Roadsaver
- Product Type
- Hot Melt Sealant
- Compatible Substrates & Surfaces
- Asphalt, Concrete
- Markets
- Building & Construction
- PACKAGING
Product is supplied in either cardboard boxes, or in meltable boxless packaging. Both package types are labeled in accordance with OSHA, GHS, and specification requirements; are sold by net weight; are interlock stacked on 48 x 40 in. (122 x 102 cm) 4-way pallets; can be stored outside; and are covered with a weather resistant pallet cover and 2 layers of UV protected stretch wrap.; BOX packaging consists of cardboard boxes containing 30 lbs. (13.6 kg) of product with 75 boxes per pallet, weighing approximately 2250 lbs. (1020 kg). Boxes contain a quick melting release film for easy removal and are taped closed, without any staples.; Meltable packaging consists of approximately 30 lbs. (13.6 kg) completely meltable packages that are interlock stacked on pallets. To use, the pallet wrap is removed, and individual blocks are placed in the Melter. There are no individual cardboard boxes to open, empty, handle, or dispose of. Meltable packaging quickly melts into the product without affecting specification conformance. Meltable packaged sealant products are sold by the pallet only and individual packages are not indented for sale
- Installation
The unit weight of Crafco RoadSaver 222 is 10.5 lbs. per gallon (1.26 kg/L) at 60°F (15.5°C). Prior to use, the user must read and follow Installation Instructions for Hot-Applied RoadSaver, PolyFlex, Parking Lot and Asphalt Rubber Products to verify proper product selection, heating methods, pavement preparation procedures, application geometry, usage precautions and safety procedures. These instructions are provided with each pallet of product.
- Technology
- Ready-to-Use Products
- Packaging Type
- Boxes
- Labeling Claims
- VOC-free
- Specification Conformance
RoadSaver 222 meets all requirements of Federal Specification SS-S-1401C, ASTM D6690 (AASHTO M324), Type II (formerly D3405, AASHTO M301) and Type III. It exceeds requirements of ASTM D6690 Type 1 (formerly D1190, AASHTO M 173) and Federal Specification SS-S-164.
- Ready to Use Product Features
- Crack Resistant
- Flexible
- Free Flowing
- Good Adhesion
- High Performance
- Resilient
- Self-Leveling
- Compatible Substrates and Surfaces
- Asphalt
- Concrete
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Aged Resilience | min. 60 | % | ASTM D6690 Type III |
| Bond (-20°F, 50% ext.) | Pass 3 Cycles | — | ASTM D6690 Type III |
| Compatibility | Pass | — | ASTM D6690 Type III |
| Cone Penetration | max. 90 | — | ASTM D6690 Type III |
| Maximum Heating Temperature | 400.0 | °F | ASTM D6690 Type III |
| Minimum Application Temperature | 380.0 | °F | ASTM D6690 Type III |
| Resilience | min. 60 | % | ASTM D6690 Type III |
| Softening Point | min. 176 | °F | ASTM D36 |
| Water Immersed Bond | Pass 3 cycles | — | ASTM D6690 Type III |
