Roadsaver 515 MN
RoadSaver 515 MN sealant is a hot-applied petroleum based product used to seal and fill cracks and joints in asphalt or Portland cement concrete pavements in moderate to cold climates. RoadSaver 515 MN is supplied in solid form which when melted and properly applied forms an adhesive and flexible compound that resists cracking in the winter and resists flow at summer temperatures. RoadSaver 515 MN is used in highway, street, and airfield pavements and is applied to pavement cracks and joints using either pressure feed melter applicators or pour pots. At application temperature RoadSaver 515 MN is a free flowing, self-leveling product. RoadSaver 515MN is produced specifically to meet requirements on the Minnesota DOT for pavement crack and joint sealant. Roadsaver 515 has been a top performing quality Crafco product for over 20 years.
Product families
Applications
- Pavement Highways Roads & Bridges
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- Roadsaver
- Product Type
- Hot Melt Sealant
- Compatible Substrates & Surfaces
- Asphalt, Concrete
- Markets
- Building & Construction
- PACKAGING
Product is supplied in either cardboard boxes, or in meltable boxless packaging. Both package types are labeled in accordance with OSHA, GHS, and specification requirements; are sold by net weight; are interlock stacked on 48 x 40 in. (122 x 102 cm) 4-way pallets; can be stored outside; and are covered with a weather resistant pallet cover and 2 layers of UV protected stretch wrap.; BOX packaging consists of cardboard boxes containing 30 lbs. (13.6 kg) of product with 75 boxes per pallet, weighing approximately 2250 lbs. (1020 kg). Boxes contain a quick melting release film for easy removal and are taped closed, without any staples.; PLEXI-melt packaging consists of 30 lb. (13.6 kg) blocks of product with 70 packages per pallet, weighing 2100 lb. (952 kg). To use, the pallet wrap is removed, and individual blocks are placed in the melter. There are no cardboard boxes or other cardboard components to open, empty, handle, or dispose of. PLEXI-melt packaging quickly melts into the product without affecting specification conformance.
- Installation
The unit weight of Crafco 34535 is 10.5 lbs. per gallon (1.26 kg/L) at 60°F (15.5°C). Prior to use, the user must read and follow Installation Instructions for Hot-Applied RoadSaver, PolyFlex, Parking Lot and Asphalt Rubber Products to verify proper product selection, heating methods, pavement preparation procedures, application geometry, usage precautions and safety procedures. These instructions are provided with each pallet of product.
- Technology
- Ready-to-Use Products
- Packaging Type
- Boxes
- Labeling Claims
- VOC-free
- Specification Conformance
RoadSaver 515 MN meets requirements of Minnesota Department of Transportation specification 3723-2. It exceeds requirements of ASTM D6690 (AASHTO M324), Type 1, (formerly ASTM D1190, AASHTO M173) and Federal Specification SS-S-164.
- Ready to Use Product Features
- Crack Resistant
- Flexible
- Free Flowing
- Good Adhesion
- High Performance
- Self-Leveling
- Compatible Substrates and Surfaces
- Asphalt
- Concrete
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Bond (-20°F, 200% ext. [1/2", 12.7 mm] Thickness, 100% Ext.) | Pass 3 Cycles | — |
| Cone Penetration | 60 - 90 | — |
| Flow (140°F) | 3.0 | mm |
| Mandrel Bend (-29°F) | Pass | — |
| Maximum Heating Temperature | 400.0 | °F |
| Minimum Application Temperature | 380.0 | °F |
| Resilience | 40.0 | % |
