Perdure P72
- Chemical Family
- Polyureas
Perdure P72 is a new generation fast-curing, two-component, poly aspartic aliphatic polyurea formulated to be used as a sealer or topcoat for interior or exterior use over properly prepared concrete or resinous flooring systems. Perdure P72 has excellent penetration and bond strength to properly prepared surfaces, UV resistant, abrasion, impact and wear-resistant.
Product families
Applications
- Floor Coatings
Product Families
- Primers & Sealers
- Top Coats
Other characteristics
- Brand
- Perdure
- Features
Abrasion Resistant, Excellent Hot Tire Pickup Resistance, Fast Curing, Good Bonding Strength, Good Non-Yellowing Properties, High Capacity of Penetration, Impact Resistance, Low Temperature Curing, Pigmentable, Self-Priming, UV Resistant, Wear Resistant
- Product Type
- 2K (2 component) Coating, Sealer, Top Coat
- 2K (2 component) Coating
- Sealer
- Top Coat
- Application Method
- Roller
- Compatible Substrates & Surfaces
- Concrete
- Color
- Transparent
- Markets
- Building & Construction
- Clean Up
Clean skin with soap and water.; Tools and equipment should be cleaned with Xylene or Lacquer Thinner.
- Coverage
Perdure P72 yields 200-250ft²/gallon at 5 - 6 mil thickness.
- Pot Life
- 20 minutes
- PACKAGING
- 2-gal
- 10-gal
- Sample
- Advantages
Self-priming and excellent penetrating to achieve excellent bond strength.; Superior abrasion, impact and wear resistance.; Excellent hot tire pickup resistance.; UV resistance does not turn 'yellow' or 'amber'.; Reduces floor care, cleaning and maintenance costs.; Low-temperature cure.
- Composition
- Two-component polyaspartic polyurea.
- Technology
- Ready-to-Use Products
- Application Methods
- Roller
- Important Considerations
Substrate temperature must be a minimum of 50°F.; The substrate must be free of dirt, waxes, curing agents and other foreign materials.; Do not apply over damp or wet substrates.; Avoid applications on surfaces with active moisture vapor transmission.; Very fast set (short working time).
- Ready to Use Product Features
- Abrasion Resistant
- Excellent Hot Tire Pickup Resistance
- Fast Curing
- Good Bonding Strength
- Good Non-Yellowing Properties
- High Capacity of Penetration
- Impact Resistance
- Low Temperature Curing
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 3
1 row| Characteristic | Value |
|---|---|
| Mixing Ratio | 1.0 |
Table 2 of 3
1 row| Characteristic | Value |
|---|---|
| Mixing Ratio | 1.0 |
Table 3 of 3
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Abrasion Resistance | 30.0 | liters sand/dry mil | ASTM D968 |
| Dry to Touch (75°F) | 2.5 | hours | — |
| Heavy Traffic | 48.0 | hours | — |
| Light Traffic (75°F) | 4 - 5 | hours | — |
| Re-coat (75°F) | 4.0 | hours | — |
| Solids Content by Volume | 72.0 | % | — |
| Tensile Strength | 5000.0 | psi | ASTM D638 |
| Viscosity (75°F) | 250 - 300 | cps | — |
