Perdure E02
- Chemical Family
- Epoxy & Epoxy Derivatives
Perdure E02 is a 100% solids, moisture tolerant epoxy primer for concrete and masonry surfaces. Perdure E02 combines the properties of water insensitivity with good wetting properties. Perdure E02 provides excellent filling and sealing properties needed under high-performance epoxy wall coatings on concrete and cinder block walls.
Product families
Applications
- Floor Coatings
Product Families
- Primers & Sealers
Other characteristics
- Brand
- Perdure
- Features
Excellent Filling Properties, Excellent Seal Properties, Excellent Substrate Adhesion, Excellent Wetting Behaviour, Fast Cure, High Solids Content, Low Modulus, Low Outgassing, Low Viscosity
- Product Type
Epoxy Coating, Primer, Solventless & High Solids Coating; Epoxy Coating; Primer; Solventless & High Solids Coating
- Application Method
- Brush, Roller, Wipe
- Compatible Substrates & Surfaces
- Concrete, Wood
- Color
- Custom
- Transparent
- Markets
- Building & Construction
- Clean Up
Clean skin with soap and water.; Tools and equipment should be cleaned with Xylene or Lacquer Thinner.
- Coverage
100 to 180 sq. ft. per gallon depending upon the application method and porosity of the substrate.
- Pot Life
- 30 - 40 minutes
- PACKAGING
- 1.5-gal
- 3-gal
- 15-gal
- Composition
Polyamide-modified epoxy resin and wetting agents.
- Maintenance
After completing the application of Perdure E02, the installer should provide the owner with maintenance instructions.; If floors become slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly.; Perdure E02 is easily cleaned with neutral soaps or detergents.; Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture.; Waxing is optional.; Long periods of heavy traffic may cause wear patterns necessitating the application of a finish coat.
- Installation
When priming, spread Perdure E02 at a rate of 250 - 275 ft² per gallon.; Care should be taken to avoid puddles.; The application can be made with a brush, roller, or squeegee.; For mortar applications, allow Perdure E02 to set for 30 minutes before topping.; After seven (7) hours, it will be too hard.; Coating applications should not be recoated until Perdure E02 is completely cured.; To speed up the application process, use a fast cure formulation.; For complete installation instructions, contact your Düraamen representative.
- Technology
- Ready-to-Use Products
- Color Selection
Perdure E02 is available in Clear or Standard Colors.. Custom colors are available subject to laboratory approval, minimum quantity, lead time for production, and increased cost.
- Labeling Claims
- Solvent-free
- Application Methods
- Brush
- Roller
- Wipe
- Substrate Requirements
Bonding surfaces must be sound, clean, and free from standing water.; Substrate temperature must be a minimum of 50°F.; The substrate must be free of dirt, waxes, curing agents and other foreign materials.; Perdure E02 should not be installed on new concrete until maximum shrinkage has occurred (at least thirty days after pour).
- Ready to Use Product Features
- Excellent Filling Properties
- Excellent Seal Properties
- Excellent Substrate Adhesion
- Excellent Wetting Behaviour
- Fast Cure
- High Solids Content
- Low Modulus
- Low Outgassing
- Compatible Substrates and Surfaces
- Concrete
- Wood
Technical data
Table 1 of 3
1 row| Characteristic | Value |
|---|---|
| Mixing Ratio by Volume | 2.0 |
Table 2 of 3
1 row| Characteristic | Value |
|---|---|
| Mixing Ratio by Volume | 1.0 |
Table 3 of 3
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry to Touch (75°F) | 6 - 8 | hours |
| Full Cure (max. Resistance) | 5 | days |
| Gloss (70°F) | Low Sheen | — |
| Re-coat (Fast Cure, 75°F) | 4 - 6 | hours |
| Re-coat (Regular Cure, 75°F) | 10 - 12 | hours |
| Solids Content by Volume | 100.0 | % |
| Viscosity (70°F) | 400 - 450 | cps |
| Weight Per Gallon (Mixed) | 9 - 9.5 | pounds per gallon |
