Perdure A01
- Chemical Family
- Acrylics & Acrylates
Perdure A01 is a clear acrylic solution formulated to create a clear, non-yellowing protective coating. Perdure A01 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust and wear. Providing a surface that is easy to clean and maintain Perdure A01 is an excellent choice for both interior and exterior applications.
Product families
Applications
- Floor Coatings
Product Families
- Primers & Sealers
Other characteristics
- Brand
- Perdure
- Features
Abrasion Resistant, Excellent Toughness, Good Color Stability, Good Non-Yellowing Properties, High Clarity, Mar Resistant, Moisture Resistant, Stain Resistant, UV Resistant, Wear Resistant; Perdure A01 is most commonly used as a sealer for Düraamen concrete, epoxy terrazzo and polymeric terrazzo flooring systems.; It is also used for sealing old and new concrete floors, exterior ramps, decks, sidewalks, slate and exposed aggregate surfaces.
- Product Type
- Sealer
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Concrete, Plastics
- Color
- Transparent
- Markets
- Building & Construction
- Clean Up
Clean skin with soap and water.; Tools and equipment should be cleaned with Xylene or Lacquer Thinner.
- Coverage
Perdure A01 yields 250 - 300ft² per gallon depending on surface porosity and/or application method.
- PACKAGING
- 1-gal
- 5-gal
- Sample
- Advantages
- UV resistant
- Excellent clarity & color retention
- Low maintenance finish
- Excellent abrasion & Mar resistance
- Seals substrate from moisture penetration
- Maintenance
After completing the application of Perdure A01, the installer should provide the owner with maintenance instructions.; If floors become slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly.; Perdure A01 is easily cleaned with neutral soaps or detergents.; Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture.; Waxing is optional.; Long periods of heavy traffic may cause wear patterns necessitating the application of a finish coat.
- Installation
Perdure A01 is applied by roller, brush, or lambs' wool applicator.; Care should be taken to minimize the entrapment of air caused by over-rolling.; Two coats are recommended for sealing applications.
- Technology
- Ready-to-Use Products
- Application Methods
- Brush
- Roller
- Substrate Requirements
Contains solvent, must be applied with proper ventilation.; Substrate temperature must be a minimum of 50°F.; The substrate must be free of dirt, waxes, curing agents and other foreign materials.
- Ready to Use Product Features
- Abrasion Resistant
- Excellent Toughness
- Good Color Stability
- Good Non-Yellowing Properties
- High Clarity
- Mar Resistant
- Moisture Resistant
- Stain Resistant
- Compatible Substrates and Surfaces
- Concrete
- Plastics
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry to Touch (75°F) | 2 - 6 | hours |
| Full Cure | 5.0 | days |
| Re-coat (75°F) | 2 - 6 | hours |
| Solids Content by Volume | 20.0 | % |
| Viscosity (75°F) | 950.0 | cps |
| VOC | 746.0 | grams/liter |
| Weight Per Gallon | 7.5 - 8 | lbs/gal |
