Perdure E10
- Chemical Family
- Epoxy & Epoxy Derivatives
Perdure E10 is a 100% solids, multipurpose epoxy binder for Düraamen self-leveling mortar and quartz systems. Perdure E10 all-purpose epoxy resin is characterized as an excellent general-purpose material with good clarity and color retention. Perdure E10 is essentially odorless and therefore can be applied in occupied areas.
Product families
Applications
- Floor Coatings
Product Families
- Primers & Sealers
- Top Coats
Other characteristics
- Brand
- Perdure
- Features
Fast Cure, General Purpose, Good Color Stability, High Clarity, Odorless, Self-Leveling
- Product Type
Epoxy Coating, Sealer, Solventless & High Solids Coating, Top Coat; Epoxy Coating; Sealer; Solventless & High Solids Coating; Top Coat
- Application Method
- Trowel
- Color
- Custom
- Transparent
- Markets
- Building & Construction
- Clean Up
Clean skin with soap and water.; Tools and equipment should be cleaned with Xylene or Lacquer thinner.
- Coverage
80 - 160 sq. ft. per gallon depending upon the application method and porosity of the substrate.
- Pot Life
- 30 - 40 minutes
- PACKAGING
- 1.25-gal
- 5-gal
- 25-gal
- Advantages
Good troweling properties when used with Duraamen self-leveling epoxy mortar and quartz systems.; Excellent color retention when used as a topcoat with Düraamen flooring systems.; Good trowelling properties when used in mortar systems.; Low odor for use in occupied areas.; Available in fast cure systems.
- Composition
- 100% solids amine cured epoxy resin.
- Maintenance
After completing the application of Perdure E10, the installer should provide the owner with maintenance instructions.; If floors become slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly.; Perdure E10 is easily cleaned with neutral soaps or detergents.; Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture.; Waxing is optional.; Long periods of heavy traffic may cause wear patterns necessitating the application of a finish coat.
- Technology
- Ready-to-Use Products
- Application Methods
- Trowel
- Substrate Requirements
Bonding surfaces must be sound, clean, and free from standing water.; Substrate temperature must be a minimum of 50°F.; The substrate must be free of dirt, waxes, curing agents and other foreign materials.; Pigmented version should not be used as a topcoat.
- Regulatory Compliance
- USDA approved for food handling applications.
- Certifications and Compliance
- USDA Certified
- Ready to Use Product Features
- Fast Cure
- General Purpose
- Good Color Stability
- High Clarity
- Odorless
- Self-Leveling
Technical data
Table 1 of 4
1 row| Characteristic | Value |
|---|---|
| Mixing Ratio by Volume | 4.0 |
Table 2 of 4
1 row| Characteristic | Value |
|---|---|
| Mixing Ratio by Volume | 1.0 |
Table 3 of 4
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry to Touch (75°F) | 6 - 8 | hours |
| Full Cure (max. Resistance) | 5 | days |
| Gloss (600°F) | 85 - 100 | — |
| Re-coat (Fast Cure, 75°F) | 4 - 6 | hours |
| Re-coat (Regular Cure, 75°F) | 10 - 12 | hours |
| Solids Content by Volume | 100.0 | % |
| Viscosity (75°F) | 950.0 | cps |
| Weight Per Gallon (Mixed) | 9 - 9.5 | pounds per gallon |
Table 4 of 4
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Abrasion Resistance (CS-17 Wheel, 1kg Load, 1000Loads) | 35 - 40 | mg Loss | ASTM C501 |
| Adhesion to Concrete (Concrete Fails) | 350.0 | psi | ACI403 |
| Adhesion to Metal | 2500.0 | psi | — |
| Compressive Strength | 11000.0 | psi | ASTM D 695 |
| Elongation | 5.5 | % | ASTM D638 |
| Flexural Strength | 8000.0 | psi | ASTM D790 |
| Hardness | 80.0 | Shore D | ASTM D2240 |
| Impact Resistance (No Cracking, Delamination or Chipping) | 16.0 | ft.Ib. | MILD 3134F |
| Indentation (Withstands for 30min Without Indentation) | 2000.0 | lb/sq.in | MILD 3134F |
| Service Temperature (Dry Heat) | 185.0 | °F | MILD 3134F |
| Service Temperature (Immersion) | 160.0 | °F | MILD 3134F |
| Tensile Strength | 8500.0 | psi | ASTM D638 |
