Silcoat 7015
Silcoat 7015 is a moisture cure silicone conformal coating.
Product families
Applications
- Electrical & Electronic Systems
- Printed Circuit Boards (PCBs)
- Semiconductor Manufacturing
- Optical Fiber & Telecom
Product Families
- Protective Coatings
Other characteristics
- Brand
- United Adhesives Silcoat
- Features
Excellent Dielectric Properties, Excellent Substrate Adhesion, Good Thermal Stability, Low Stress, Solventless, Water Resistant
- Product Type
1K (1 component) Coating, Conformal Coating, Solventless & High Solids Coating; 1K (1 component) Coating; Conformal Coating; Solventless & High Solids Coating
- Application Area
Electrical Components, Semiconductors, Telecommunications Applications; Electrical Components; Semiconductors; Telecommunications Applications
- Application Method
- Dip Coating
- Color
- Blue
- Safety
Silcoat 7015 silicone releases low content of oxmine volatile byproduct in cure process when it is exposed to moisture. Please use adequate ventilation in its cure stage. General hygiene regulations should be observed.
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Storage
Silcoat 7015 has a shelf life of at least 12 months when stored at ambient (< 25°C) in the originally sealed container. Storage beyond the date specified does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
- Cure
- Moisture Cure
- Technology
- Ready-to-Use Products
- Characteristic
Silcoat 7015 is room temperature moisture curable conformal coating. It is one-component, solvent-free coating compound. After cure at ambient condition with present of moisture, it forms a rubbery layer with excellent adhesion to most substrates, which provides protection for electronic devices. Silcoat 7015 is best applied by painting or dipping. A coating thickness of 5 to 10 mils is recommended for best results.
- Application Methods
- Dip Coating
- Typical Applications
- Protection of electronic components / devices
- For harsh environment applications
- Water resistant coating
- Automotive electronics
- Semiconductor and telecommunications
- Low thermal stress coating
- Processing Instruction
Important! To reach best results, the coating surface needs to be clean and free of oil, grease, lubricants, soaps, dust, mold release agents, etc. Cure time will vary depending on exposure conditions, For instance, a 5 mil thick coating cured under 50% R.H. at 25°C will need ~50 minutes to cure through.. We recommend running preliminary tests to optimize conditions for the particular application. The cure of Silcoat 7015 may be accelerated with a higher humidity and temperature. Recommendations for automated dispensing equipment and accelerated cure profiles can be obtained by contacting directly to United Adhesives, Inc.
- Special Features and Benefits
- One part ready to use
- Solvent free (100% solid)
- Room temperature moisture cure
- Bond to various substrates
- Strong media resistance
- Flexible over -40°C to 180°C
- Excellent dielectric property
- Low thermal stress
- Ready to Use Product Features
- Excellent Dielectric Properties
- Excellent Substrate Adhesion
- Good Thermal Stability
- Low Stress
- Solventless
- Water Resistant
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cure Time (5 Mils, 25°C, 50% Rh) | 50.0 | Min | UATM |
| Density | 1.1 | Gram /cc | ASTM D792 |
| Skin Over Time (25C 55%R.H.) | 25.0 | Min | UATM |
| Solvent Content | 0.0 | Weight | UATM |
| Viscosity (25°C) | 900.0 | cps | ASTM D2196 |
| Weight Loss In Cure | max. 5% | Weight % | TGA |
Table 2 of 2
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant (100 Hz) | 3.2 | — | ASTM D150 |
| Dielectric Strength | min. 450 | Volt/mil AC | ASTM D149 |
| Dissipation Factor (100 Hz) | max. 0.01 | — | ASTM D150 |
| Elongation | 60.0 | % | ASTM D638 |
| Hardness | 35.0 | Shore A | ASTM D2240 |
| Peel Adhesion (Over Al Plate, 25°C) | min. 3 | Ib/inch | United Adhesives TM |
| Tensile Strength | 2.5 | Mpa | ASTM D638 |
| Glass Transmission | -120.0 | °C | TGA |
| Useful Temperature Range | -55 to 200 | °C | TGA |
| Volume Resistivity | min. 10E+14 | Ohm-cm | ASTM D257 |
