Silductor 6310
- Chemical Family
- Silicones
Silductor 6310 is an electrically conductive silicone adhesive .
Product families
- Conductive Adhesives
Other characteristics
- Brand
- Silductor
- Cure Method
- Heat Cure
- Product Type
- Conductive Adhesive
- Application Area
Aerospace Applications, Displays, Electronic Components, Gaskets, Oscillators, Semiconductor Die Attach, Semiconductors, Sensors, Telecommunications Applications; Aerospace Applications; Displays; Electronic Components; Gaskets; Oscillators; Semiconductor Die Attach; Semiconductors; Sensors; Telecommunications Applications
- Color
- Silver
- Safety
- General hygiene regulations should be observed.
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Storage
Silductor 6310 has a shelf life of at least 6 months when stored below − 15 °C in the originally sealed container. The 'Best use before end' date of each batch appears on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
- Shelf LIfe
- Minimum 6 months at 15°C (ITM)
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Characteristic
Silductor 6310 is a silicone-based electrically conductive adhesive designed for electronic applications. After cure at elevated temperature, it forms a flexible, rubbery conductive adhesive having superior electrical and thermal conductivity. It is used for low stress soldering / connecting / conducting applications such as in Sensors, Filters, Crystal Oscillators, MEMS, LCD Driver IC's, CCD chip attach, Wafer Lamination, etc. Silductor 6310 is dispensable.
- Typical Applications
- Aerospace and Automotive electronics
- Semiconductor and Telecommunications
- Conducting while dissipating heat
- Grounding of power devices
- EMI shielding and gasketing
- Thermally conductive vibration
- Processing Instruction
Important! Silductor 6310 is platinum cure system. Please keep applied surface clean and avoid using this material on any surface that contains sulfur, amine, phosphorous, organo-metals, acid, etc., because these contaminants could inhibit the cure of the material.; Always store unused Silductor 6310 in freezer (< − 15 °C) to prevent any possible deteriorating of the material or settling of the filler.; We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions can be obtained by contacting directly to United Adhesives, Inc.
- Special Features and Benefits
- High electrical conductivity
- Flexible for low stress bonding
- High thermal conductivity
- High temperature stability
- Reworkable
- Low bleeding, low volatile
- Low ionic content
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 4.9 | Gram /cc | ASTM D792 |
| Thixtropic Index | 2.1 | — | ASTM D2196 |
| Viscosity (25°C) | 41000.0 | cP.s | ASTM D2196 |
| Weight Loss In Cure | max. 0.3% | Weight % | TGA |
Table 2 of 2
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion (A/Ai Lap Shear) | min. 150 | Psi | ASTM D1002 |
| Coefficient Of Thermal Expansion | max. 100 | ppm/°C | IPC-TM-650 |
| Cure Time (125°C) | 60.0 | Min | DSC |
| Cure Time (150°C) | 30.0 | Min | DSC |
| Elongation | 160.0 | % | ASTM D638 |
| Hardness | 45.0 | Shore A | ASTM D2240 |
| Pot / Work Life (25°C) | min. 72 | Hr | Viscosity double |
| Temperature Usage | -50 to 230 | °C | TGA |
| Tensile Strength | 3.1 | MPa | ASTM D638 |
| Glass Transmission | -120.0 | °C | DMA |
| Thermal Conductivity | min. 4 | W/m-K | ASTM D5470 |
| Volume Resistivity | -5 x 10⁻⁴ | Ohm-cm | ASTM D257 |
