Silcoat SC8022
- Chemical Family
- Silicones
Silcoat SC8022 is a silicone coating and potting gel.
Properties
- Physical Form
- Gel
Other characteristics
- Brand
- United Adhesives Silcoat
- Product Type
2K (2 component) Coating, Coating, Potting Compound; 2K (2 component) Coating; Coating; Potting Compound
- Application Area
Connectors, Housing, Semiconductors, Telecommunications Applications; Connectors; Housing; Semiconductors; Telecommunications Applications
- Compatible Substrates & Surfaces
- Metal, Plastics
- Color
- Transparent
- Safety
SilCoat SC8022 silicone contains neither toxic nor corrosive substances that might require special handling precautions. General hygiene regulations should be observed.
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Storage
SilCoat SC8022 has a shelf life of at least 12 months when stored at < 24°C in the originally sealed container. Storage beyond the date specified does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
- Shelf LIfe
- Minimum 6 months at 23°C (Viscosity double)
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Pails
- Characteristic
SilCoat SC8022 is a two-part transparent coating and potting gel. It is a flowable, addition-curing, silicone that cures at elevated temperature to a very firm rubbery gel with excellent adhesion to various plastics and metals. It is non-corrosive and self-priming adhesion, and can be automated to dispense from pails or hand extruded from cartridge.
- Labeling Claims
- Non-Corrosive
- Processing Instruction
Important! SilCoat SC8022 is platinum cure system. Please keep applied surface / housing clean and avoid using this material on any place that contains sulfur, amine, phosphorous, organo-metals, acid, etc. because these contaminants could inhibit the cure the material.. We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions can be obtained by contacting directly to United Adhesives Inc.
- Special Features and Benefits
- Very soft for stress compliance
- Excellent dielectric properties
- Mechanical shock and vibration damping
- Low bleeding, low volatile
- Broad range of temperature stability
- Ready to Use Product Features
- Excellent Dielectric Properties
- Excellent Substrate Adhesion
- Good Flow
- Low Bleeding
- Low Volatility
- Self-Priming
- Shock Resistant
- Soft
Technical data
Table 1 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (As Mixed) | 0.98 | Gram /cc | ASTM D792 |
| Mixing Ratio | 1:1 | Vol./Wt | — |
| Viscosity (25°C, Mixed) | 3000.0 | cP.s | ASTM D2196 |
Table 2 of 2
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient Of Thermal Expansion | 280.0 | ppm/°C | IPC-TM-650 |
| Cure Time (125°C) | 15.0 | Minutes | DSC |
| Cure Time (25°C) | approx. 12 | Hours | DSC |
| Dielectric Constant (100 Hz) | 2.6 | — | ASTM D150 |
| Dielectric Constant (100 Hz) | 2.66 | — | ASTM D150 |
| Dielectric Strength | min. 450 | Volt/mil AC | ASTM D149 |
| Dissipation Factor (100 Hz) | max. 0.003 | — | ASTM D150 |
| Dissipation Factor (100 Hz) | max. 0.001 | — | ASTM D150 |
| Hardness | 35.0 | Shore A | ASTM D2240 |
| Pot / Work Life (25°C) | 60.0 | Minutes | Viscosity double |
| Glass Transmission | -120.0 | °C | TGA |
| Useful Temperature Range | -55 to 200 | °C | TGA |
