ReVue™ CRM
ReVue™ CRM is a high-quality repair mortar. It is simple to work with and can be used for both interior and exterior applications.
Product families
Applications
- Pavement Highways Roads & Bridges
- Repair & Rehabilitation
Product Families
- Mortar & Grouts
Other characteristics
- Brand
- ReVue
- Features
Ease of Handling, Fast Curing, Freeze/Thaw Stability, Good Bonding Strength, High Performance, High Strength, High Temperature Resistance, Wide Temperature Operating Range
- Product Type
- Mortar
- Application Area
- Masonry
- Application Method
- Trowel
- Usage
Ideal for use in the following applications: warehouses, vertical repairs, truck docks, heavy industrial repairs, commercial floors and ramps. With its capability to withstand extreme temperatures, ReVue-CRM is ideal for fast track projects in high traffic areas including streets and truck docks.
- Markets
- Building & Construction
- Storage
Materials should be stored indoors between 65ºF (18ºC) and 90ºF (32ºC).
- Disposal
Dispose of all excess material, packaging and other waste in accordance with federal, state and local regulations.
- Advantages
Fast curing. ReVue-CRM is open to standard traffic within 4 hours of application and can be applied as thin as ¼".; High strength; Interior and exterior applications; One component; Gains strength quickly; Compatible with a wide range of temperatures; Superior bond; Better coverage; Resistant to freeze and thaw conditions; No VOC (0 g/L).
- Shelf LIfe
- One year from date of manufacture.
- Limitations
Do Not Use: 1. Where hydrostatic pressure (water) exists or moisture emissions exceed level permitted for installing floor covering. 2. Over presswood, particle board, Masonite, chipboard, OSB, underlayment board not of APA Underlayment (exterior) grade or similar dimensionally unstable materials susceptible to movement or swelling. 3. Over gypsum based patches or underlayment material due to chemical reaction. 4. Single layer stripwood floors.
- Technology
- Ready-to-Use Products
- Packaging Type
- Bags
- Labeling Claims
- VOC-free
- Application Methods
- Trowel
- Surface Preparation
The concrete surface should be clean and sound. The surface should be free of any bond breakers including but not limited to loose gravel, oil, wax, grease or dirt. Concrete with cap intact that is being overlayed to change slope, etc. needs to be aggressively blasted with shot or scarified. The concrete should be presoaked and saturated surface-dry SSD condition without standing water.
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Direct Shear Bond (1 Day) | 155.0 | psi | — |
| Direct Shear Bond (28 Day) | 445.0 | psi | — |
| Direct Shear Bond (7 Day) | 380.0 | psi | — |
| Freeze & Thaw Resistance (RDM) | 97.0 | % | — |
| Open to Traffic | 4.0 | hours | — |
| Rapid Chloride Permeability (Low) | 1050.0 | — | — |
| Set Time | 30 - 45 | minutes | — |
| Slant Shear Bond (1 Day) | 1900.0 | psi | — |
| Slant Shear Bond (28 Day) | 3300.0 | psi | — |
| Slant Shear Bond (7 Day) | 2900.0 | psi | — |
| Strength (1 Day) | 4500.0 | psi | — |
| Strength (28 Day) | 7000.0 | psi | — |
