Ebalta Kunststoff Gmbh AH 110GL
- Chemical Family
- Epoxy & Epoxy Derivatives
AH 110/GL is an epoxy resin with high strength even on elevated temperatures. It can be used as a casting resin with powdery fillers like aluminum powder, as a laminating resin with fiber glass cloth and as a bonding resin for granular fillers like aluminum granules. Depending on the application you can choose from a variety of hardeners. AH 100/GL is suitable as laminating resin for large area parts and thick laminates. Due to its almost odourles skin friendly hardener GL, this mixture is especially applicable as laminating resin. With a mixing ratio of 100:39 you reach an about 15°C higher TG, slightly stiffer laminates as well as better impact resistance. The laminate thickness should not exceed 6-7 mm.
Product families
Applications
- Consumer Goods — Other Consumer Goods Applications
- Other Building Materials
- Textile Manufacturing
Product Families
- Epoxies
Other characteristics
- End Uses
Construction Applications, General Purpose, Textile Applications
- Polymer Name
- Epoxy Resins & Compounds
- Flexural Strength
- 125.0 - 145.0 MPa
- Basis
- High strength general purpose resin
- Markets
- Building & Construction
- Consumer Goods
- Industrial
- Storing
At appropriate storage 18-25°C. Occuring crystallization due to disadvantageous storage conditions can be made return by warming up the material at approx. 60° C for some hours. Opened containers should be closed immediately after use and be protected against moisture. This material should be used up as soon as possible. Shelf life is indicated on the labels.
- Properties
- unfilled high strength nearly odorless
- Technology
- Plastics
- Material Features
- General Purpose
- High Strength
- Odorless
- Package Unit
5,000 kg / 10,000 kg / 50,000 kg / 220,000 kg 1,2 kg / 5 kg / 15 kg / 50 Kg
- Processing Instruction
The temperature of material and processing should be between 18 and 25° C. The mixing of resin and hardener should be made intensively and if possible without any bubbles at room temperature. We recommend a post curing with a temperature rise of about 10°C/hour. Difficult geometries should be supported during the curing cycle. Afterwards the part should be cooled down at about 20°C/hour.
- Plastics and Elastomers End Uses
- Construction Applications
- General Purpose
- Textile Applications
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shore hardness | 84 ± 3 | Shore D | DIN ISO 7619-1 |
| Viscosity (25°C) | 1450 ± 150 | mPa.s | — |
| Compressive Strength | 105 ± 10 | MPa | EN ISO 604 |
| Density (20°C) | 1,13 ± 0,02 | g/cm3 | — |
| Flexural elongation at break | 6.0 ± 0.5 | % | EN ISO 178 |
| Pot Life (200g/20°C) | 40 - 50 | minutes | — |
| Flexural modulus | 3500 ± 300 | MPa | EN ISO 178 |
| Curing time at RT | 10-14 | Hrs | — |
| Flexural strength | 135 ± 10 | MPa | EN ISO 178 |
| Heat resistance (HDT) | 75 ± 3 | °C | DIN EN ISO 75 B |
| Impact resistance (Charpy) | 25 ± 10 | kJ/m2 | EN ISO 179 |
