Ebalta Kunststoff Gmbh MG 707Z 400
- Chemical Family
- Polyurethanes (PU)
Ebalta MG 707 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system). The total amount of Z 400 and Z 460 always has to be 30 g for 100 g comp. A
Product families
Applications
- Consumer Goods — Other Consumer Goods Applications
- Exterior & Body
- Interior
- Other Automotive Applications
- Tooling & Moldmaking
Product Families
- Polyurethanes
Other characteristics
- Density
- 1100.0 - 1140.0 kg/m³
- End Uses
Automotive Applications, Automotive Exterior Parts, Automotive Interior Parts, Consumer Applications, Modeling Material
- Polymer Name
- Polyurethane (unspecified)
- Tensile Strength
- 41.0 - 51.0 MPa
- Markets
- Automotive & Transportation
- Consumer Goods
- Industrial
- Storing
Storage at room temperature 18-25 °C.; Opened containers should be closed immediately after use and should be used up as soon as possible.
- Packages
- 1,000 kg / 5,000 kg
- 0,310 kg / 1,000 kg
- Properties
high impact strength good flexural strength Working temperature range from -40°C until 100 °C long processing time RoHS conform
- Technology
- Plastics
- Material Features
- Good Impact Strength
- Processing Instruction
We recommend to evacuate each component separately and carefully.; After choosing required reactivity of the system, follow mixing ratios carefully.; If casting is not made in a vacuum pouring plant, the finished mixture has to be evacuated before casting.; The product can be cast in polyaddition- and in polycondensation-curing rubber molds, as well as in polyurethane and epoxy-molds, which have to be treated with release agents.; Thermal treatment This processing is applied to achieve optimum mechanical and thermal properties.; For special geometrical molds we recommend to use a supporting mold during the curing process. Processing parameters: Mold temperature: 40 – 60 °C
- Certifications and Compliance
- RoHS Compliant
- Compatible Polymers and Resins
- Polyethylenes (PE)
- Polypropylenes (PP)
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Consumer Applications
- Modeling Material
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
22 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| TG in TMA TG | 120 | °C | — |
| TG in TMA TG | 120 | °C | Methode TMA |
| Elongation of tensile strength | 12 ± 1 | % | — |
| Density (20°C) | 1,12 ± 0,02 | g/cm3 | — |
| Flexural modulus | 1500 ± 200 | MPa | EN ISO 178 |
| Pot Life (200g/20°C) | 8-12 | minutes | — |
| Flexural strength | 63 ± 5 | MPa | EN ISO 178 |
| Curing Time (50°C) | 40 - 45 | minutes | — |
| Heat resistance (HDT) | 107 ± 3 | °C | DIN EN ISO 75 B |
| Post Curing | 12 ( 100) | Time in h (Temperature in °C) | — |
| Impact resistance (Charpy) | 24 ± 10 | kJ/m2 | EN ISO 179 |
| Flexural Strength | 63 ± 5 | MPa | EN ISO 178 |
