To catalogue
FLASHBOND™ UV-6502CL
- Chemical Family
- Epoxy & Epoxy Derivatives
SetWORX™ 411HP is a toughened, high strength, industrial grade structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. 411HP is a one component, heat cure, conductive epoxy adhesive. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Electrical & Electronics — Packaging & Assembly
- Adhesives & Sealants
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Encapsulants
- Structural Adhesives
Other characteristics
- Brand
- FLASHBOND
- Product Type
- Encapsulant, Epoxy Adhesive, Potting Compound
- Encapsulant
- Epoxy Adhesive
- Potting Compound
- Application Area
- Electronic Components
- Compatible Substrates & Surfaces
- Ceramic, Glass, Metal
- Color
- Transparent
- Markets
- Consumer Goods
- Electrical & Electronics
- PACKAGING
- Syringes
- Bulk
- Shelf LIfe
- 1 Year
- Technology
- Ready-to-Use Products
- Packaging Type
- Bulk
- Product Features
- RoHS& REACH Compliant
- Excellent Chemical Resistance
- High Bond Strength
- Fast UV Cure
- Applications
- Electronics
- Encapsulation
- Sealant
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Ready to Use Product Features
- Chemical Resistant
- Excellent Wetting Behaviour
- Fast Cure
- Good Bonding Strength
- High Clarity
- Low Viscosity
- UV Curable
- Compatible Substrates and Surfaces
- Ceramic
- Glass
- Metal
Technical data
Table 1 of 2
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Optimal Cure Parameters (10 seconds) | 315 - 365 | nm |
| Density | 1.12 | g/ml |
| Optimal Curing Condition | 100 - 300 | mW/cm2 |
| Minimum Irradiation Time | 8 | sec |
| Recommended Irradiation Time | 20 | sec |
| Maximum Curing Thickness | 1 | mm |
| Tensile Lap Shear Strength | 2500 | psi |
| Elongation | 5 | % |
| Glass Transition Temperature (Tg) | 135 | °C |
| Operating Temperature Range | -55 to 200 | °C |
| Coefficient of Linear Thermal Expansion (α1/α2) | 70/180 | ppm/°C |
| Refractive Index (589nm, 20°C) | 1.51 | — |
Table 2 of 2
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscocity (20 RPM, 25°C) | 200 - 500 | cps |
| Specific Gravity (25°C) | 1.12 | — |
