SetWORX™ 1510
- Chemical Family
- Epoxy & Epoxy Derivatives
EPOXIBOND™ EB-119SP is unfilled, low viscosity, heat curing, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates. It has long pot-life and has an amber color change upon cure.
Product families
Applications
- Consumer Goods — Stationery
- Art & Office Supplies
- Industrial Adhesives & Sealants
- Industrial Manufacturing
- Medical Devices & Assemblies
- Optical Fiber & Telecom
Product Families
- Structural Adhesives
Other characteristics
- Brand
- SetWORX
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive, Adhesive
- 2K (2 component) Adhesive
- Adhesive
- Application Area
Medical Applications, Optical Applications, Optoelectronics Devices; Medical Applications; Optical Applications; Optoelectronics Devices
- Compatible Substrates & Surfaces
- Ceramic, Glass, Metal, Plastics, Wood
- Markets
- Adhesives & Sealants
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Shelf LIfe
- 1 Year
- Cure
- Air Dry
- Availability
Available in 50mL, 200mL, and 400mL dual cartridges.
- Technology
- Ready-to-Use Products
- Certification
- ISO-10993-5 compliant for cytotoxicity
- Packaging Type
- Cartridges
- Labeling Claims
- Bisphenol A-free
- Non-Hazardous
- Tin-free
- Curing
- Recommended Cure : 18-24 hours at 25°C
- Safety Information
- For Industrial Use Only
- Practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
- Warning
- Adequate ventilation of work place and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention. Refer to Material Safety Data Sheet (MSDS) for additional health and safety information.
- Use Instructions
Mix Resin: Hardener – 100:100 grams by weight or 1:1 by volume and vacuum degas.; Cure as recommended achieving the desired properties.; Typical cured properties were determined using recommended cure schedule.; Some difference in properties may occur with the alternate or other cure schedules.
- Shelf Life Storage
One year when stored in unopened containers at an average temperature of 25°C.
- Certifications and Compliance
- ISO 10993
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Ready to Use Product Features
- Chemical Resistant
- Electrically Insulating
- Fast Setting
- Good Bonding Strength
- Impact Resistance
- Solvent Resistance
- Toughened
- Compatible Substrates and Surfaces
- Ceramic
- Glass
- Metal
- Plastics
- Wood
Technical data
Table 1 of 2
15 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity | 1.1 | — |
| Hardness | 80 | Shore D |
| Lap Shear Strength to Aluminium (at -55°C) | 2300 | psi |
| Lap Shear Strength to Aluminium (at 25°C) | 2800 | psi |
| Lap Shear Strength to Aluminium (at 95°C) | 150 | psi |
| Die Shear Strength | 1800 | psi |
| T-peel Strength | 45 | pli |
| Service Temperature Range | -55 to 125 | °C |
| Glass Transition Temperature (Tg) | min. 55 | °C |
| Coefficient of Linear Thermal Expansion (Below Tg) | 62 | 10⁻⁶/°C |
| Coefficient of Linear Thermal Expansion (Above Tg) | min. 200 | 10⁻⁶/°C |
| Dielectric Strength | 450 | Volts/mil |
Table 2 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Adhesive | Part A | — |
| Hardener | Part B | — |
| Mix Ratio by Weight (Resin/Hardener) | 100/100 | — |
| Mix Ratio by Volume (Resin/Hardener) | 1/1 | — |
| Mixed Viscosity (at 25°C) | 20,000 - 30,000 | cps |
| Pot Life (at 25°C, 10 grams) | 10 - 12 | minutes |
