To catalogue
FLASHBOND™ UV-3700F
- Chemical Family
- Epoxy & Epoxy Derivatives
FLASHBOND™ UV-8300LV is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including metals, glass, ceramics and some plastics. This product exhibits good surface wetting and adhesion to glass and many plastics. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (405nm) as well as down to 365nm. Flashbond UV-8300LV has been tested to and passes ISO-10993-5 for cytotoxicity.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Electrical & Electronics — Packaging & Assembly
- Adhesives & Sealants
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Encapsulants
- Structural Adhesives
Other characteristics
- Brand
- FLASHBOND
- Cure Method
- Heat Cure
- Product Type
- Encapsulant, Epoxy Adhesive, Potting Compound
- Encapsulant
- Epoxy Adhesive
- Potting Compound
- Application Area
- Electronic Components
- Compatible Substrates & Surfaces
- Ceramic, Glass, Metal
- Color
- Off White
- Markets
- Consumer Goods
- Electrical & Electronics
- PACKAGING
- Syringes
- Bulk
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Bulk
- Product Features
- RoHS& REACH Compliant
- Excellent Chemical Resistance
- High Bond Strength
- Fast UV Cure
- Applications
- Electronics
- Encapsulation
- Sealant
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Ready to Use Product Features
- Chemical Resistant
- Fast Cure
- Good Bonding Strength
- Low Shrinkage
- Low Thermal Expansion
- Low Viscosity
- UV Curable
- Compatible Substrates and Surfaces
- Ceramic
- Glass
- Metal
Technical data
Table 1 of 3
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Water Absorption (24 hr submersion at 25°C) | 0.1 | % |
| Coefficient of Linear Thermal Expansion (α1/α2) | 40/150 | ppm/°C |
| Elongation | 1 | % |
| Maximum Curing Thickness | 1 | mm |
| Recommended Irradiation Time | 20 | sec |
| Irradiation Time | min. 10 | sec |
| Density | 1.5 | g/ml |
| Viscocity (20 RPM, 25°C) | 3000 - 4000 | cps |
Table 2 of 3
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Intensity | 100 - 300 | mW/cm2 |
| Optimal Wavelength | 315 - 365 | nm |
| Thermal Cure (at 125°C) | 30 | minutes |
Table 3 of 3
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Glass Transition Temperature (Tg) | 138 | °C |
| Hardness | 80 | Shore D |
| Mixed Viscosity (at Room Temperature) | 250,000 | cps |
| Service Temperature Range | -55 to 250 | °C |
| Specific Gravity | 1.5 | — |
| Volume Resistivity (at 500V) | 1x10¹⁴ | ohm-cm |
