EpoxySet Inc. HTG-72
HTG-72 – is our highest temperature resistance thermal grease, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. These compounds resist changes in consistency at temperatures up to 360°C, maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Chassis & Brake
- Adhesives & Sealants
Product Families
- Greases
Other characteristics
- Features
Filled, Good Stability, Good Thermal Conductivity, High Temperature Resistance, High Temperature Strength, Improved Heat Transfer Efficiency, Long Term Protection, Low Vent Bleed
- Product Type
- Grease
- Application Area
- Semiconductors
- Color
- Grey
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Warning
Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of work place and ovens is essential. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.
- Shelf LIfe
- 2 Years
- Technology
- Ready-to-Use Products
- Industrial Usage
These materials are intended for industrial use only, and the practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
- Applications
This material will not bleed, dry, harden or melt in normal industrial use and provides long-term material stability. It can be used for mounting semiconductor devices, power transistors, and diodes; coupling heat generating assemblies to chassis; heat transfer medium on ballast; thermal joints; and many electronics, automotive and electrical applications.
- Ready to Use Product Features
- Filled
- Good Stability
- Good Thermal Conductivity
- High Temperature Resistance
- High Temperature Strength
- Improved Heat Transfer Efficiency
- Long Term Protection
- Low Vent Bleed
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity | 3 | — |
| Evaporation (at 200°C, 24 hrs) | 0.1 | %wt |
| Evaporation (at 300°C, 24 hrs) | 0.3 | %wt |
| Operating Temperature Range | 40 to 360 | °C |
| Thermal Conductivity (at 36°C) | 0.8 | W/m °K |
| Thermal Resistance | 0.06 | °C-In/W |
| Dielectric Strength (0.05" gap) | 362 | Volts/mil |
| Dielectric Constant (at 1 kHz) | 4.5 | — |
| Dissipation Factor (at 1 kHz) | 0.003 | — |
| Volume Resistivity | 1.2x10^14 | Ω-cm |
