EpoxySet Inc. EB-126HT
EB-126HT is two components, clear epoxy system. This long work life, low viscosity resin system is designed for the bonding, coating, sealing, and impregnation of electrical and structural components. The cured system has excellent electrical and physical properties above 250°C with outstanding high temperature stability. It also provides excellent moisture, chemical, and corrosion resistance as well as resistance to thermal and mechanical shock.
Identification
Product families
Applications
- Semiconductor Manufacturing
Product Families
- Structural Adhesives
Other characteristics
- Product Type
- 2K (2 component) Adhesive
- Application Area
- Electrical Components
- Color
- Transparent
- Markets
- Electrical & Electronics
- Warning
Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of work place and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.
- Shelf LIfe
The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Industrial Usage
These materials are intended for industrial use only, and the practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
- Packaging And Availability
Pint, Quarts, Gallons, 5-gallon Pails, 55-gallon drums 50mL, 200mL, 400mL dual cartridges; Premixed & Frozen: 3ml, 10ml, 30ml syringes
- Certifications and Compliance
- ISO 9001
- Ready to Use Product Features
- Chemical Resistant
- Corrosion Resistant
- Good Thermal Stability
- High Temperature Strength
- Moisture Resistant
- Thermal Shock Resistant
Technical data
Table 1 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Mixed Viscocity | 8000 - 11000 | cPs |
| Pot Life (at 25°C, 500g) | 8 | hours |
| Recommended Cure (at 100°C) | 2 | hours |
| Recommended Cure (at 150°C) | 4 | hours |
| Alternate Cure (at 125°C) | 4 | hours |
Table 2 of 2
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Giravity | 1.2 | — |
| Hardness | 92 | Shore A |
| Tensile Strength | 10000 | psi |
| Glass Transition Temperature (Tg) | 140 | °C |
| Service Temperature Range (Continuous) | -55 to 300 | °C |
| Service Temperature Range (Intermittent) | -55 to 350 | °C |
| Dielectric Constant (at 60 Hz) | 2.8 | — |
| Dissipation Factor (at 60 Hz) | 0.008 | — |
| Volume Resistivity | 1x10^16 | Ω-cm |
