EPOXIBOND™ EB-316M

Chemical Family: Epoxy & Epoxy Derivatives

EB-316M is a semi-rigid, high strength structural epoxy adhesive. This tough adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance medical grade epoxy adhesive passes 500 thermal cycles from -50°C to 150°C. EB-316M is excellent for cryogenic temperature applications.

Product families

Applications

Healthcare & Pharma — Medical

Medical Devices & Assemblies

Product Families

Ready-to-Use Products — Adhesives & Sealants

Structural Adhesives

Other characteristics

Brand: EPOXIBOND
Product Type: Structural Adhesive
Application Area: Medical Devices
Markets: Healthcare & Pharma
Warning: Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of workplace and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.
Shelf LIfe: The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.
Technology: Ready-to-Use Products
Industrial Usage: These materials are intended for industrial use only, and the practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
Use instructions: 1. Mix at room temperature, 100 grams of Part-A with 100 grams of Part-B and vacuum degas. 2. Cure as recommended to achieve the desired properties. 3. Typical cured properties were determined using recommended cure schedule. 4. Some difference in properties may occur with the alternate or other cure schedules.
Ready to Use Product Features: Excellent Shear Strength
Excellent Toughness
Flexible
Good Peeling Strength
High Impact Resistance
High Performance
High Strength
Low Temperature Flexibility

Technical data

Table 1 of 4

1 row

Characteristic	Value	Unit
Resin Viscocity (at 25°C)	30000 - 40000	cPs

Table 2 of 4

5 rows

Characteristic	Value	Unit
Mix Ratio (By Weight, Part A/Part B)	100/100	—
MIx Viscocity (at 25°C)	35000 - 45000	cPs
Pot Life (at 25°C, 100g)	45 - 60	minutes
Recommended Cure (at 65°C)	2	hours
Alternate Cure (at 25°C)	48	hours

Table 3 of 4