URACAST™ UXP-052107-1

Chemical Family: Urethanes

UXP-052107-1 is a filled, two-part urethane resin system, which combines good handling characteristics with excellent cured properties. Its low viscosity allows good flowability and air release.

Product families

Applications

Electrical & Electronics — Packaging & Assembly

Potting Compounds

Electrical & Electronics — Parts & Components

Printed Circuit Boards (PCBs)

Electrical & Electronics — Wire & Cable

Power Transmission & Distribution

Product Families

Ready-to-Use Products — Adhesives & Sealants

Encapsulants

Other characteristics

Brand: URACAST
Product Type: 2K (2 component) Adhesive, Encapsulant, Potting Compound; 2K (2 component) Adhesive; Encapsulant; Potting Compound
Application Area: Amplifiers, Coils, Printed Circuit Boards, Rectifiers, Relays, TV Sets; Amplifiers; Coils; Printed Circuit Boards; Rectifiers; Relays; TV Sets
Markets: Electrical & Electronics
Warning: Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of workplace and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.
Shelf LIfe: 12 Months
Technology: Ready-to-Use Products
Industrial Usage: These materials are intended for industrial use only, and the practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
Product Features: Fast setting, polyurethane potting compound designed for potting battery packs, controllers, and coil windings.
Use instructions: 1. Mix contents thoroughly each time before removing material. 2. To each 15 grams of Part A, add 100 grams of Part B and mix it well preferably using a mechanical mixer. 3. Vacuum degas to remove any dissolved or entrapped air. 4. Proceed with the casting or potting application and cure as recommended.
Applications: The cured elastomer has excellent water resistance and is exceptionally resistant to thermal shock. It is useful for general purpose casting, potting or encapsulating intricate circuits, operational amplifiers, transformers, and other electric/electronic components.
Certifications and Compliance: ISO 9001
Ready to Use Product Features: Ease of Handling
Fast Setting
Filled
Good Flow
Low Viscosity
Thermal Shock Resistant
Water Resistant

Technical data

Table 1 of 4

1 row

Characteristic	Value	Unit
Density (at 25°C, PART-A)	1.22	cPs

Table 2 of 4

8 rows

Characteristic	Value	Unit
Mix Ratio by Weight (A:B)	15/100	—
Mixed Density (at 25°C)	1.57	—
Viscosity (at 25°C, PART-A)	65 - 85	cPs
Viscosity (at 25°C, PART-B)	15,000 - 30,000	cPs
Mixed Viscocity (at 25°C)	4000 - 8000	cPs
Gel Time (at 25°C, 115g)	8 - 12	minutes
Recommended Cure Schedule (at 25°C)	8 - 24	hours
Recommended Cure Schedule (65°C)	30	minutes

Table 3 of 4