To catalogue
FLASHBOND™ UV-3607HT
- Chemical Family
- Epoxy & Epoxy Derivatives
FLASHBOND™ UV-5608DC is an innovative light cure epoxy adhesive. It has unique features that allow for fast processing and fixturing of parts. Once the adhesive has been activated with UV light, it has set open time that allows for assembly of parts. The product continues to cure at room temperature or rapidly cures when exposed to low temperature heat. The cured product exhibits low shrinkage and excellent thermal, water and chemical resistance. Typical applications include bonding of optics, connectors, fibers, lenses, prisms and other electronic components where low shrinkage and low outgassing are required.
Product families
Applications
Electrical & Electronics — Devices & Assemblies
- Automotive Electronics
Electrical & Electronics — Parts & Components
- Printed Circuit Boards (PCBs)
Electrical & Electronics — Wire & Cable
- Optical Fiber & Telecom
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Encapsulants
- Structural Adhesives
Other characteristics
- Brand
- FLASHBOND
- Cure Method
- Heat Cure
- Product Type
- 1K (1 component) Adhesive
- Application Area
- Optoelectronics Devices, Printed Electronics
- Optoelectronics Devices
- Printed Electronics
- Compatible Substrates & Surfaces
- Ceramic, Glass, Metal
- Color
- Transparent
- Markets
- Electrical & Electronics
- PACKAGING
- Syringes
- Bulk
- Shelf LIfe
- 1 Year
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Bulk
- Product Features
- RoHS & REACH Compliant
- Excellent Chemical Resistance
- High Bond Strength
- Fast UV Cure
- Applications
- Electronics
- Encapsulation
- Sealant
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Ready to Use Product Features
- Chemical Resistant
- Encapsulated
- Fast Cure
- Good Bonding Strength
- Low Viscosity
- UV Curable
- Compatible Substrates and Surfaces
- Ceramic
- Glass
- Metal
Technical data
Table 1 of 3
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Coefficient of Linear Thermal Expansion (α1/α2) | 70/180 | ppm/°C |
| Density | 1.12 | g/ml |
| Elongation | 5 | % |
| Irradiation Time | min. 10 | sec |
| Maximum Curing Thickness | min. 4 | mm |
| Recommended Irradiation Time | 20 | sec |
| Viscocity (20 RPM, 25°C) | 3000 - 4000 | cps |
| Water Absorption (24 hr submersion at 25°C) | 0.2 | % |
Table 2 of 3
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Refractive Index (589nm, 20°C) | 1.57 | — |
| Intensity | 100 - 300 | mW/cm2 |
| Optimal Wavelength | 315 - 365 | nm |
| Thermal Cure (at 125°C) | 30 | minutes |
Table 3 of 3
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity | 1.12 | — |
| Hardness | 80 | Shore D |
| Lap Shear Strength (at 25°C) | 2000 | psi |
| Glass Transition Temperature (Tg) | 125 | °C |
| Service Temperature Range | -55 to 200 | °C |
| Volume Resistivity (at 500V) | 1x10¹⁴ | ohm-cm |
