EPOXIBOND™ EB-107LP-1
- Chemical Family
- Epoxy & Epoxy Derivatives
EPOXIBOND™ EB-177 is a low viscosity, high Tg, two part epoxy that can be used for potting, encapsulating, or bonding. It is used highly in the medical, optical, and semiconductor industries.EB-177 has excellent high temperature resistance at 300°C and excellent solvent, chemical, and moisture resistance including gamma rays, autoclave, and ETO. It is an excellent choice for semiconductor applications including capillary under fill or flipchip die attach.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Housewares
- Consumer Electronics
- Medical Devices & Assemblies
- Adhesives & Sealants
- Optical Fiber & Telecom
Product Families
- Encapsulants
Other characteristics
- Brand
- EPOXIBOND
- Product Type
2K (2 component) Adhesive, Adhesive, Encapsulant, Potting Compound; 2K (2 component) Adhesive; Adhesive; Encapsulant; Potting Compound
- Application Area
Electronic Components, Fiber Optic Cables, Medical Applications, Medical Devices, Mirror, Optical Applications, Optoelectronics Devices; Electronic Components; Fiber Optic Cables; Medical Applications; Medical Devices; Mirror; Optical Applications; Optoelectronics Devices
- Compatible Substrates & Surfaces
- Glass, Metal, Plastics
- Note
Typical Cured Properties : Tested at 25°C unless otherwise indicated
- Markets
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Shelf LIfe
- 1 Year
- Technology
- Ready-to-Use Products
- Curing
- Recommended Cure
- 3 hr at 65°C
- Alternate Cure Schedule
- 24-48 hr at 25°C
- Safety Information
Warning : Although the system contains low volatility materials, care should be taken in handling. Adequate ventilation of workplace and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention. Refer to Material Safety Data Sheet for additional health and safety information.
- Use Instructions
Mix 100 grams of Resin, PART-A with 25 grams of Hardener, PART-B and vacuum degas.; Apply to clean bonding surfaces and cure as recommended to achieve the desired properties.; Typical cured properties were determined using recommended cure schedule.; Some difference in properties may occur with the alternate or other cure schedules.
- Shelf Life Storage
The shelf life of these materials is greater than one year when stored in unopened containers at an average temperature of 25°C.
- Suggested Applications
- Medical
- USP Class VI Certified for Biocompatibility - Suggested for medical devices such as catheters, endoscopic products; adhesion to most metals and some plastics, resisting to ETO, gamma, and autoclave, resisting X-ray radiation, potting and protection of scintillator crystals, CT Detector packaging, adhesive for the optical beam pathway in photo-diode arrays.
- Fiber Optic
- adhesive for glass and plastic fibers, wicking into fiber bundles used in patch cords, endoscopes or sensor devices, adhesive/seal/encapsulant used for fiber packaging and components
- Opto-electronic
- LCD/LED adhesive for laminating glass layers; adhesion to PET plastic, general potting, encapsulation, and protection, spectral transmission in VIS and IR light, adhesive for precision optics including lens, prism, beam splitter cubes, mirrors, and diodes
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- USP Class VI
- Ready to Use Product Features
- Good Mechanical Properties
- Good Optical Properties
- High Impact Performance
- Low Viscosity
- Compatible Substrates and Surfaces
- Glass
- Metal
- Plastics
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Refractive Index (at 25°C, 589nm) | 1.52 | — |
| Spectral Transmission (at 380-980nm) | min. 99 | % |
| Spectral Transmission (at 980-1640nm) | min. 97 | % |
| Spectral Transmission (at 1640-2040nm) | min. 95 | % |
Table 2 of 3
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity | 1.1 | — |
| Hardness | 85 | Shore D |
| Lap Shear Strength to Aluminium | 2400 | psi |
| Service Temperature Range | -55 to 200 | °C |
| Glass Transition Temperature (Tg) | 65 | °C |
| Coefficient of Linear Thermal Expansion (Below Tg) | 42 | 10⁻⁶/°C |
| Coefficient of Linear Thermal Expansion (Above Tg) | min. 100 | 10⁻⁶/°C |
| Dielectric Constant (at 1 kHz) | 4.14 | — |
| Dissipation Factor (at 1 kHz) | 0.012 | — |
| Volume Resistivity | 1x10¹³ | ohm-cm |
Table 3 of 3
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Adhesive | Part A | — |
| Hardener | Part B | — |
| Mix Ratio by Weight (Adhesive/Hardener) | 100/25 | — |
| Mixed Viscosity (at 25°C) | 100 - 200 | cps |
| Pot Life (at 25°C, 100 grams) | 2 | hours |
