FLASHBOND™ UV-5402S
- Chemical Family
- Epoxy & Epoxy Derivatives
FLASHBOND™ UV-8701E is a semi-thixotropic, light curing epoxy adhesive that bonds well to a wide variety of substrates including engineered plastics such as Ultem™, Lexan™, and ABS. This product exhibits good surface wetting and adhesion to glass and many plastics. UV-8701 is clear magenta when uncured but turns translucent when cured as a built in cure indicator. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400-415nm). Can be cured at 150°C for shadowed areas if necessary.
Product families
- Structural Adhesives
Other characteristics
- Brand
- FLASHBOND
- Cure Method
- Heat Cure
- Product Type
- Epoxy Adhesive
- Note
¹ Tested on G-10 glass epoxy substrates cured under recommended conditions.
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Certifications and Compliance
- ISO 9001
- REACH (Europe)
- RoHS Compliant
- Ready to Use Product Features
- UV Curable
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 4800 | cps |
| Density | 1.37 | g/ml |
| Minimum Irradiation Time | 10 | seconds |
| Recommended Irradiation Time | 30 | seconds |
| Maximum Curing Thickness | 1 | mm |
| Tensile Lap Shear Strength ¹ | 2500 | psi |
| Elongation | 3 | % |
| Hardness | 78 | Shore D |
| Glass Transition Temperature (Tg) | 72 | °C |
| Operating Temperature | -55 to 150 | °C |
| Coefficient of Thermal Expansion (α1) | 45 | ppm/°C |
| Coefficient of Thermal Expansion (α2) | 150 | ppm/°C |
