To catalogue
Electroblend® PP-1800
- Chemical Family
- PolyolefinsPolypropylenes (PP)
Electroblend® PP-1800 is a low flow conductive polypropylene compound characterized by superb impact strength properties.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
- Automotive Lighting
- Exterior & Body
- Other Automotive Applications
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
- Other Devices & Assemblies
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Brand
- Electroblend
- Polymer Name
- Polypropylene (unspecified)
- Processing Methods
- Injection Molding
- Usage
- Automotive applications
- Industrial parts
- Electronic & Electrical parts
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Features
- Conductive
- Low flow
- Superb impact strength
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Processing Method
- Injection Molding
- Material Features
- Conductive
- Good Impact Strength
- Low Flow
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Electrical/Electronic Applications
- Handles
- Headlight Cover
- Industrial Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 20 | MPa | ASTM D638 |
| Tensile Elongation Break | 30 | % | ASTM D638 |
| Flexural Modulus | 800 | MPa | ASTM D790 |
| Flexural Strength | 25 | MPa | ASTM D790 |
Table 2 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.82 MPa, Unannealed, 4.0 mm) | 77 | °C | ASTM D648 |
Table 3 of 5
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1 | g/cm3 | ASTM D792 |
| Molding Shrinkage (3.2 mm) | 1.20 - 1.40 | % | ASTM D955 |
| Notched Izod Impact (23°C) | 550 | J/m | ASTM D256 |
| Drying Temperature | 80 | °C | — |
| Drying Time | 2 - 4 | hr | — |
| Rear Temperature | 185 - 190 | °C | — |
| Middle Temperature | 190 - 195 | °C | — |
| Front Temperature | 195 - 210 | °C | — |
| Nozzle Temperature | 210 - 220 | °C | — |
| Processing (Met) Temp | 190 - 220 | °C | — |
| Mold Temperature | 60 - 90 | °C | — |
Table 4 of 5
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistivity | 10^3 - 10^5 | ohms | ASTM D257 |
Table 5 of 5
1 row| Characteristic | Value | Method |
|---|---|---|
| Flame Rating (1.6 mm) | HB | UL94 |
