To catalogue
FRblend® ABS-1301
- Chemical Family
- Acrylonitrile Butadiene Styrene (ABS)Styrenics
FRblend® ABS-1301 is an unfilled, halogen-free flame retardant acrylonitrile butadiene styrene compound. The flame retardant system is based on non-chlorinated and non-brominated.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Electrical & Electronics — Parts & Components
- Housings & Enclosures
Product Families
Plastics — Basic Thermoplastics
- Styrenics
Other characteristics
- Brand
- FRblend
- Polymer Name
- Acrylonitrile Butadiene Styrene (ABS)
- Melt Flow Index
- 27.0 - 27.0 g/10 min
- Processing Methods
- Injection Molding
- Usage
- Hand phones housing
- Hard disk drives
- Scanners
- Laptop housing
- Markets
- Consumer Goods
- Electrical & Electronics
- Features
- Good impact resistance
- Good processability
- Flame retardant
- Bromine free
- Chlorine free
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Labeling Claims
- Bromine-free
- Chlorine-free
- Halogen-free
- Processing Method
- Injection Molding
- Material Features
- Flame Retardant
- Good Processability
- Impact Resistance
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Electronic Accessory Cases
- Housings
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2547 | MPa | ASTM D638 |
| Tensile Strength | 40 | MPa | ASTM D638 |
| Tensile Elongation Break | 14 | % | ASTM D638 |
| Flexural Modulus | 2256 | MPa | ASTM D790 |
| Flexural Strength | 62 | MPa | ASTM D790 |
Table 2 of 4
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.27 | g/cm3 | ASTM D792 |
| Melt Flow Rate (220°C/10 kg) | 27 | g/ 10 min | ASTM D1238 |
| Molding Shrinkage (3.2 mm) | 0.4 - 0.6 | % | ASTM D955 |
| Water Absorption - 24hr | 0.3 | % | ASTM D570 |
| Notched Izod Impact (23°C) | 174 | J/m | ASTM D256 |
| Drying Temperature | 70 - 90 | °C | — |
| Drying Time | 2 - 4 | hr | — |
| Rear Temperature | 185 - 190 | °C | — |
| Middle Temperature | 190 - 200 | °C | — |
| Front Temperature | 200 - 210 | °C | — |
| Nozzle Temperature | 210 - 220 | °C | — |
| Mold Temperature | 60 - 80 | °C | — |
Table 3 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 4.0 mm) | 80 | °C | ASTM D648 |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Flame Rating (1.6 mm) | V-0 | UL94 |
