To catalogue
XPETG MATT Black
XPETG MATT Black is one of the world‘s most common thermoplastic polymers. Extrudr XPETG Matt was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards.
Properties
- Physical Form
- Filament
Product families
Applications
Applications
- Consumer Goods — Housewares; Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Sports & Recreation
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Tooling & Moldmaking
Product Families
Plastics — 3D Printing Polymers
- Thermoplastic Filament
Other characteristics
- Brand
- XPETG
- End Uses
3D Printing Applications, Consumer Applications, Industrial Parts, Prototyping, Toys
- Polymer Name
- Polyethylene Terephthalate Glycol (PETG)
- Processing Methods
- 3D Printing
- Markets
- Consumer Goods
- Industrial
- Features
- Good mechanical properties
- High chemical resistance
- Low warping tendency
- Low shrinking
- Recycleable
- Technology
- Plastics
- Labeling Claims
- Recyclable
- Silicone-free
- Material Features
- Chemical Resistant
- Good Adhesion
- Good Elongation
- Good Impact Strength
- Good Mechanical Properties
- Good Optical Properties
- Good Printability
- Heat Resistance
- Shelf Life Storage
Store in a dry room at room temperature (18-27°C / 65-80°F). Keep out of direct heat and sunlight. When stored correctly, this material has a shelf life of 2 years.
- Certifications and Compliance
- FDA Compliant
- REACH (Europe)
- RoHS Compliant
- Plastics and Elastomers End Uses
- 3D Printing Applications
- Consumer Applications
- Industrial Parts
- Prototyping
- Toys
- Plastics and Elastomers Processing Methods
- 3D Printing
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (E-Modulus) | 3054 - 3146 | MPa | ISO 527 |
| Hardness | 76 | Shore D | ISO 868/D |
| Yield Stress | 52.8 - 53.2 | MPa | ISO 527 |
| Elongation At Yield | 3.4 - 3.6 | % | ISO 527-2 |
| Strength | 52.8 - 53.2 | Mpa | ISO 527 |
| Elongation At Break | 6.5 - 8.7 | % | ISO 527-2 |
| Notched Impact Strength | 1.3 - 1.81 | kj/m² | ISO 180 |
| Unnotched Impact Strength | 72 - 84 | kj/m² | ISO 180 |
| Heat Deflection Temperature Hdt/B | 67 | °C | ISO 75 |
| Vicat A (Vst) | 85 | V-2 | ISO 306 |
| Density | 1.41 | g/cm³ | ISO 1183-1/A |
