To catalogue
XPETG CF Carbon
XPETG CF Carbon is one of the world‘s most common thermoplastic polymers. Extrudr XPETG CF was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.
Properties
- Physical Form
- Filament
Product families
Applications
Applications
- Consumer Goods — Housewares; Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Sports & Recreation
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Tooling & Moldmaking
Product Families
Plastics — 3D Printing Polymers
- Thermoplastic Filament
Other characteristics
- Brand
- XPETG
- Density
- 1410.0 - 1410.0 kg/m³
- End Uses
3D Printing Applications, Consumer Applications, Industrial Parts, Prototyping, Toys
- Polymer Name
- Polyethylene Terephthalate Glycol (PETG)
- Processing Methods
- 3D Printing
- Markets
- Consumer Goods
- Industrial
- Features
- Good mechanical properties
- High chemical resistance
- Low warping tendency
- Low shrinking
- Technology
- Plastics
- Labeling Claims
- Silicone-free
- Material Features
- Chemical Resistant
- Good Mechanical Properties
- Low Shrinkage
- Low Warpage
- Shelf Life Storage
Store in a dry room at room temperature (18-27°C / 65-80°F). Keep out ofdirect heat and sunlight. When stored correctly, this material has a shelf life of 2 years.
- Certifications and Compliance
- REACH (Europe)
- RoHS Compliant
- Plastics and Elastomers End Uses
- 3D Printing Applications
- Consumer Applications
- Industrial Parts
- Prototyping
- Toys
- Plastics and Elastomers Processing Methods
- 3D Printing
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (E-Modulus) | 3350 ± 50 | MPa | ISO 527 |
| Yield Stress | 59 ± 0,4 | MPa | ISO 527 |
| Elongation At Yield | 3,8 ± 0,1 | % | ISO 527 |
| Strength | 59 ± 0,4 | MPa | ISO 527 |
| Elongation At Break | 9,4 ± 1,5 | % | ISO 527-2 |
| Notched Impact Strength | 1,7 ± 0,4 | kj/m² | ISO 180 |
| Unnotched Impact Strength | 67 ± 7 | kj/m² | ISO 180 |
| Heat Deflection Temperature Hdt/B | 69 | °C | ISO 75 |
| Vicat A (Vst) | 85 | °C | ISO 206 |
| Density | 1,41 | g/cm³ | ISO 1183-1XA |
