To catalogue
Extrudr PETG transparent orange
Extrudr PETG transparent orange is one of the world‘s most common thermoplastic polymers. Extrudr PETG was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the FDA-, REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.
Properties
- Physical Form
- Filament
Product families
Applications
Applications
- Consumer Goods — Housewares; Consumer Goods — Other Consumer Goods Applications; Consumer Goods — Sports & Recreation
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Tooling & Moldmaking
Product Families
Plastics — 3D Printing Polymers
- Thermoplastic Filament
Other characteristics
- Density
- 1290.0 - 1290.0 kg/m³
- End Uses
3D Printing Applications, Consumer Applications, Industrial Parts, Prototyping, Toys
- Polymer Name
- Polyethylene Terephthalate Glycol (PETG)
- Flexural Modulus
- 2100.0 - 2100.0 MPa
- Processing Methods
- 3D Printing
- Color
- Orange
- Markets
- Consumer Goods
- Industrial
- Features
- Good mechanical properties
- High chemical resistance
- Low warping tendency
- Low shrinking
- Recycleable
- Flame Rating
- UL 94 V2
- Technology
- Plastics
- Labeling Claims
- Recyclable
- Silicone-free
- Material Features
- Chemical Resistant
- Flame Retardant
- Good Adhesion
- Good Elongation
- Good Impact Strength
- Good Mechanical Properties
- Good Optical Properties
- Good Printability
- Shelf Life Storage
Store in a dry room at room temperature (18-27°C / 65-80°F). Keep out of direct heat and sunlight. When stored correctly, this material has a shelf life of 2 years.
- Certifications and Compliance
- FDA Compliant
- REACH (Europe)
- RoHS Compliant
- UL 94
- Plastics and Elastomers End Uses
- 3D Printing Applications
- Consumer Applications
- Industrial Parts
- Prototyping
- Toys
- Plastics and Elastomers Processing Methods
- 3D Printing
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (E-Modulus) | 2100 | MPa | ISO 178 |
| Flexural Strength | 68 | MPa | ISO 178 |
| Tensile Modulus (E-Modulus) | 3100 | MPa | ISO 527 |
| Yield Stress | 51 | MPa | ISO 527 |
| Elongation At Yield | 4 | % | ISO 527-2 |
| Strength | 61 | MPa | ISO 527 |
| Elongation At Strength | 4 | % | ISO 527 |
| Nominal Elongation At Break | 28 | % | ISO 527-2 |
| Notched Impact Strength | 4,7 | kj/m² | ISO 180 |
| Unnotched Impact Strength | no break | kj/m² | ISO 180 |
| Vicat A (Vst) | 78* | °C | ISO 306 |
| Melting Temperature | 180-200 | °C | ISO 3146-C |
