SOLLAFORM 2009
- Chemical Family
- Polyamides
SOLLAFORM 2009 features a Polyacetal Copolymer Compound, intended for injection molding. Fluidity Index 9 g/10 "
Product families
Applications
- Consumer Goods — Housewares
- Exterior & Body
- Interior
- Other Automotive Applications
- Seating
- Structural Components
- Other Industrial Applications
- Other Parts & Components
Product Families
- Polyamides
Other characteristics
- Brand
- SOLLAFORM
- Polymer Name
- Polyacetal Copolymer (POM)
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Main Properties
SOLLAFORM 2009 presents typical properties of Poly Acetal Copolymers • Excellent Dimensional Stability • Good Mechanical Properties • Good Thermal Resistance up to 100 OC continuous • Low Coefficient of Friction • High Stiffness; SOLLAFORM 2059 presents properties typical of Poly Acetal Copolymers, with optimization of impact properties. • Excellent Dimensional Stability • Good Mechanical Properties • Good Thermal Resistance up to 100 OC continuous • Low Coefficient of Friction • High Stiffness; SOLLAFORM 327 presents properties typical of Poly Acetal Copolymers, with optimization of impact properties. • Excellent Dimensional Stability • Good Mechanical Properties • Good Thermal Resistance up to 100 OC continuous • Low Coefficient of Friction • High Stiffness
- Material Features
- Dimensional Stability
- Good Mechanical Properties
- Good Thermal Stability
- High Impact Resistance
- High Rigidity
- High Stiffness
- Low Friction
- Plastics and Elastomers End Uses
- Bearings
- Fasteners
- Kitchenware
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Weight | 1.41 | g/cm³ | ISO D792 |
Table 2 of 4
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 64 | MPa | ISO D638 |
| Traction Module | 2800 | MPa | ISO D638 |
| Elongation At Break | 3 | % | ISO D638 |
| Bending Strength | 80 | MPa | ISO D790 |
| Reflection Module | 2500 | MPa | ISO D790 |
| Rockwell Hardness | 75 | Climb | ISO D785 |
| Izod Cp Notched Impact Resistance | 58 | J/M | ISO D256 |
Table 3 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature | 166 | ºC | — |
| Continuous Heat Resistance | 80 | ºC | — |
| Deformation Temperature Under Load 1.82 Mpa | 95 | ºC | ISO D648 |
| Deformation Temperature Under Load 0.46 Mpa | 115 | ºC | ISO D648 |
Table 4 of 4
1 row| Characteristic | Value | Unit |
|---|---|---|
| Shrinkage In Molding | 2.2-2.5 | % |
