SAUEREISEN Fast-Trak NovolaK Glaze 229
- Chemical Family
- Epoxy & Epoxy Derivatives
SAUEREISEN Fast-Trak NovolaK Glaze 229 is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. FastTrak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or novolak epoxy formulations which are used with an appropriate Sauereisen Primer.
Other characteristics
- Features
Chemical Resistant, Corrosion Resistant, Low Porosity
- Product Type
- 2K (2 component) Coating, Top Coat
- 2K (2 component) Coating
- Top Coat
- Application Method
- Gun, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Industrial
- Paints & Coatings
- Clean Up
All equipment should be cleaned by scrubbing with a stiff brush and MEK or MCT (Monochlorotoluene) at the end of each working period or when build-up becomes pronounced.
- Shelf LIfe
FastTrak NovolaK Glaze and ConoWeld Primer have a shelf life of one year when stored in unopened, tightly sealed containers in a dry location at 70°F.. Avoid freezing. If there is a doubt as to the quality of the materials, consult a Sauereisen representative.
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Bottles
- Cans
- Pails
- Setting/Curing
By properly maintaining air and substrate temperatures, the Fast-Trak Glazes can be cured to meet production scheduling. Contact Sauereisen regarding specific curing parameters.
- Characteristic
An installation-friendly alternative to tile linings.; Available in vinyl ester or novolak epoxy formulations.; Fast chemical set - less down time.; Low porosity.; An economical coating to be used independently or as a glossy topcoat for the Fast-Trak fiber-filled linings.
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Time (Working Time, 70°F) | 30.0 | minutes | ASTM C-308 modified |
| Bond Strength to Concrete | Concrete Failure | — | ASTM D-4541 |
| Components | 2.0 | — | — |
| Maximum Service Temperature (Dry) | 180.0 | °F | — |
| Thickness (100% Solids, WFT) | 10.0 | mils | — |
