SAUEREISEN ConoPrime 502
SAUEREISEN ConoPrime 502 is a two part epoxy primer to be used in conjunction with the Sauereisen ConoFlex No. 381. Recommended for use on concrete and various substrate types. Formulated to provide a chemical bond with ConoFlex Urethane No. 381.
Product families
- Concrete Coatings & Stains
Other characteristics
- Features
Corrosion Resistant, Excellent Moisture Resistance, Excellent Substrate Adhesion, Good Adhesion, Good Bonding Strength, Good Penetration
- Product Type
- 2K (2 component) Coating, Epoxy Coating, Primer
- 2K (2 component) Coating
- Epoxy Coating
- Primer
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Paints & Coatings
- Clean Up
All equipment should be cleaned with MEK before material cures. If removal is required after cure, consult Sauereisen for recommendations.
- Coverage
- Coverage per gallon
- Shelf LIfe
Sauereisen ConoPrime No. 502 Resin and Hardener have a shelf life of 6 months when stored in unopened, tightly sealed containers in a dry location at 70°F.. Do not freeze. If there is a doubt as to the quality of the materials, consult a Sauereisen representative.
- Application
Premix the Part A and Part B seperately before combining. Primer is packaged in premeasured containers consisting of Hardener Part A, and Resin Part B, which must be mixed together before use.. Completely empty contents of Hardener Part A into Resin Part B container. Using a slow speed 1/2 inch drill motor with a "Jiffy" type blade, mix thoroughly for three minutes until blended to uniform consistency. Primer is ready for use immediately after mixing.
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
- Characteristic
Promotes tenacious adhesion of Sauereisen No. 381 and No. 309; Easy to apply - spray, brush or roll; High bond strength; Excellent moisture tolerance
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Time (Working Time, 70°F) | 30 - 45 | minutes | ASTM C-308 modified |
| Application Time (Tack free, 70°F) | 9.0 | hours | — |
| Adhesion Values (White Blasted Steel, SSPC-SP10/NACE 2) | min. 3000 | psi | (ASTM D4541) |
| Concrete (Dry) | Concrete Failure | — | ASTM D-4541 |
| Components | 2 parts | — | — |
| Hardness | 76.0 | Shore D | ASTM 2240-86 |
| Tensile Strength | 4100.0 | psi | ASTM D-638-86 |
| Percent Solids (Volume) | 99.1 | % | — |
| Volatile Organic Compounds (VOCs) | 8.56 | g/L | — |
