SAUEREISEN PenePrime 500
SAUEREISEN PenePrime 500 is a water-borne epoxy primer to be used in conjunction with the Sauereisen line of coatings, linings and flooring materials. PenePrime is specifically formulated to penetrate deep within concrete substrates. It is recommended to ensure maximum adhesion where conventional primers may not easily penetrate, or where solvent thinned primers are undesirable. This primer is an integral part of the aforementioned linings in that it seals porous substrates and promotes adhesion of the specified protective material. No. 500 helps reduce off-gassing from concrete. It offers easy application properties to reduce total down time.
Product families
- Concrete Coatings & Stains
Other characteristics
- Features
Corrosion Resistant, Excellent Substrate Adhesion, Good Penetration, Low VOC
- Product Type
2K (2 component) Coating, Epoxy Coating, Primer, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Primer; Waterborne Coating
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Paints & Coatings
- Clean Up
All equipment should be cleaned with MEK before material cures. If removal is required after cure, consult Sauereisen for recommendations.
- Coverage
- Coverage per Gallon
- Shelf LIfe
Sauereisen PenePrime No. 500 Liquid and Hardener have a shelf life of one (1) year when stored in unopened, tightly sealed containers in a dry location at 70°F. Do not freeze. If there is a doubt as to the quality of the materials, consult a Sauereisen representative.
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Cans
- Pails
- Setting/Curing
Primer must be allowed to cure at least three hours but not more than 24 hours prior to application of a Sauereisen epoxy system. If recoat time exceeds 24 hours, consult Sauereisen.
- Characteristic
Specifically formulated to deeply penetrate concrete substrates.; Promotes tenacious adhesion of Sauereisen protective systems.; Easy to apply - brush or roll.; Water-borne - no noxious or toxic odors during application.; VOC compliant.
- Labeling Claims
- Low VOC
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Time (Working Time, 70°F) | 30.0 | minutes | — |
| Application Time (Tack Free, 70°F) | 3.0 | hours | — |
| Bond Strength to Concrete | Concrete Failure | — | ASTM D-4541 |
| Components | 2 parts | — | — |
| Thickness | 5 - 10 | mils | — |
