SAUEREISEN ConoThane Glaze 310
- Chemical Family
- Urethane Acrylates
Sauereisen ConoThane Glaze 310 provides outstanding gloss and color retention along with excellent resistance to abrasion and chemicals, including solvents. This product matches the performance of baked finishes and may be used on properly prepared and primed substrates of nearly any composition. ConoThane Glaze No. 310 white and clear are U.S.D.A. approved. The product is suitable for both interior and exterior environments.
Product families
- Concrete Coatings & Stains
Other characteristics
- Features
Abrasion Resistant, Chemical Resistant, Corrosion Resistant, Excellent Retention, Excellent Solvent Resistance, Good Weather Stability, Heat Resistance, Higher Gloss
- Product Type
- 2K (2 component) Coating
- Application Area
- Bridges, Marine Applications
- Bridges
- Marine Applications
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal
- Markets
- Paints & Coatings
- Coverage
Estimated coverage is 450 square feet per gallon at 3.5 mils wet film thickness.
- PACKAGING
Part A - Hardener is packaged in a quart container.; Part B - Resin is packaged in a gallon container.
- Resin Type
- Aliphatic Acrylic Urethane
- Cure
- Heat Cure
- Technology
- Ready-to-Use Products
- Characteristic
Apply by spray, brush or roller; Chemical resistant.; Authorized by USDA for use in federally inspected meat and poultry plants.; Meets performance MIL-C-83286, MIL-C-83445.
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Abrasion Resistance (Loss After 1,000 Cycles, CS-10 Wheel) | 80.0 | mg | ASTM D-5060 |
| Accelerated Weathering (Gloss Retention, 1000 hours) | 95.0 | % | ASTM G-53 |
| Adhesion | Pass 5B | — | ASTM D-3359 |
| Flash Point (Seta) | 49.0 | °F | — |
| Flexibility (Mandrel) | Pass 1/4 | inch | ASTM D-1737 |
| Percent Solids (Weight) | 60.0 | % | — |
| Percent Solids (Volume) | 56.5 | % | — |
| Pot Life (70°F) | 4 - 6 | hours | — |
| Sag Rating (Lenetta) | Pass 6 | mils | — |
| Specular Gloss (60°C) | 85 - 90 | % | — |
| Thickness (Wet) | 3.5 | mils | — |
| Thickness (Dry) | 2.0 | mils | — |
